w w w . d e l l . c o m s u p p o r t . d e l l . c o m

8If a modem is not already installed, go to step 11. If you are replacing a modem, remove the existing modem:

a Remove the screw securing the modem to the system board, and set it aside.

b Pull straight up on the attached pull-tab to lift the modem out of its connector on the system board, and disconnect the modem cable.

modem cable connector

modem

modem screw

system board connector

9Connect the modem cable to the modem.

NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors and realign the card.

10Align the modem with the screw hole and press the modem into the connector on the system board.

11Install the screw to secure the modem to the system board.

12Replace the cover.

114

Adding and Replacing Parts

Page 114
Image 114
Dell PP04S owner manual Adding and Replacing Parts