
w w w . d e l l . c o m s u p p o r t . d e l l . c o m
Finalizing Your Network Connection (Security Settings)
To finalize your connection, you must change your wireless security settings to match the wireless network you are trying to connect to. Choose one of the following connection options based on the security settings for your network:
•Connecting to a Network without
•Connecting to a Network with
•Connecting to a Network with Wired Equivalent Protocol (WEP) Security Requirements
NOTE: Network security settings are only provided by your network administrator and are unique to your network. Dell cannot provide this information.
Connecting to a Network Without
1In the Preferred networks area, click the name of your wireless network.
2Click Properties.
3From the Network Authentication
Earlier versions of the Dell™ wireless software may not contain the
4From the Data encryption
NOTE: Your computer can take up to 1 minute to connect to the network.
5Click OK.
Your network setup is complete.
Connecting to a Network With
The following instructions are basic steps for connecting to a WPA network. If your network requires a user name, password, or domain settings, consult the setup instructions in the User’s Guide for your wireless network card.
NOTE: WPA protocols require that you know the Network Authentication and Data Encryption settings for your wireless network. In addition, your
1In the Preferred networks section, click the name of your wireless network.
2Click Properties.
76