3Insert the new device into the bay, push the device until it clicks, and push the device latch release in so that it is flush with the bay.

4Connect the D/Bay cable to the Dell D/Bay connector on the computer.

Removing and Installing Devices While the Computer Is Running

CAUTION: Before performing any of the procedures listed below, read the safety instructions on page 9.

1Double-click the Safely Remove Hardware icon on the taskbar.

2Click the device you want to eject.

NOTICE: To prevent damage to devices, place them in a safe, dry place when they are not installed in the computer. Avoid pressing down on them or placing heavy objects on top of them.

Using the Dell™ D/Bay

53

Page 53
Image 53
Dell PP04S owner manual Using the Dell D/Bay