Dell PP12S manual Removing the Battery, To remove the battery

Models: PP12S

1 234
Download 234 pages 9.65 Kb
Page 22
Image 22

The battery is too hot to start charging if the light flashes alternately green and orange. Disconnect the computer from the electrical outlet and allow the computer and the battery to cool to room temperature. Then connect the computer to an electrical outlet to continue charging the battery.

For information about resolving problems with a battery, see “Power Problems” in your User’s Guide.

Removing the Battery

CAUTION: Using an incompatible battery may increase the risk of fire or explosion. Replace the battery only with a compatible battery purchased from Dell. The battery is designed to work with your Dell™ computer. Do not use a battery from other computers with your computer.

CAUTION: Before performing these procedures, turn off the computer, disconnect the AC adapter from the electrical outlet and the computer, disconnect the modem from the wall connector and computer, and remove any other external cables from the computer.

NOTICE: You must remove all external cables from the computer to avoid possible connector damage.

NOTICE: If you choose to replace the battery with the computer in standby mode, you have up to 1 minute to complete the battery replacement before the computer shuts down and loses any unsaved data.

To remove the battery:

1If the computer is connected to a docking device (docked), undock it. See the documentation that came with your docking device for instructions.

2Ensure that the computer is turned off or hibernated in a power management mode.

3Slide the battery-bay latch release on the bottom of the computer, and then remove the battery from the bay.

22

Quick Reference Guide

Page 22
Image 22
Dell PP12S manual Removing the Battery, To remove the battery