DeLonghi DSM800, DSM700 instruction manual Operating Your High-Speed Slicer / Shredder

Operating Your High-Speed

Slicer / Shredder

1)Put the food into the feed tube. Note: Do not cut food too small. Pack the feed tube tightly. This prevents food from slipping sideways during processing. Do not place fingers in feed tube.

2)Switch the stand mixer “on” to “min” speed (or speed 1 for cheese). Then push your food down with the stomper.

Care and Cleaning for Your High-Speed Slicer / Shredder

1)Switch the stand mixer “off” and remove the high- speed slicer / shredder from the unit.

2)Lid, Stomper, Cutting Discs, Base Plate: Wash by hand in warm water with mild detergent, and then rinse and dry thoroughly. Use caution when handling the cutting discs, they are very sharp.

3)Base: Wipe the inside with a damp cloth. Do not let the central hole or the underneath get wet. Dry thoroughly.

4)Note: Some foods such as carrots may discolor the plastic. To remove this, rub the plastic with a cloth dipped in vegetable oil.