DeLonghi DSM800, DSM700 Adjusting the Paddle Height, Care and Cleaning for Your Fruit and

Figure 1

Operating Your Fruit and Vegetable Strainer (continued)

5)Insert the paddle (1) and turn it until it stops. Then push into mixer head. Figure 1.

6)To remove it, turn it back in the opposite direction.

7)Lower the mixer head. The paddle blades should bend slightly against the strainer.

8)Note: If you need to adjust the height, see the “Adjust ing the Paddle Height” section.

9)Allow cooked food to cool.

10)Switch the stand mixer to

“min”. Clear the

screen between batches.

11)Keep hands out of bowl and away from the paddle during operation.

12)Increase the speed slowly to 1 or 2, but reduce the speed if the ingredients start to splatter.

Adjusting the Paddle Height

1)Unplug the stand mixer and raise the mixer head.

2)Insert the paddle. Hold the paddle, and then loosen the nut.

3)Lower the mixer head. Adjust the height by turning the paddle. The paddle blades should bend slightly against the strainer.

4)Raise the head, hold the paddle and then tighten the nut.

Care and Cleaning for Your Fruit and

Vegetable Strainer

1)Switch the stand mixer “off” before removing the paddle. Wash bowl, paddle and screen by hand with warm water and mild detergent, and then rinse and dry thoroughly.