DeLonghi DSM800 Assembling Your Splash Guard con’t, Care and Cleaning for Your Splash Guard

Assembling Your Splash Guard (con’t)

6)To remove the splash guard, raise the mixer head according to direction 1. Once the mixer head has been raised and is locked into place, slide the splash guard down.

Care and Cleaning for Your Splash Guard

1)Wash by hand with warm water and mild deter- gent, and then rinse and dry thoroughly.

STAINLESS STEEL BOWL (Model 34655: 7-Quart) (Model 34654: 5-Quart)

Assembling Your Bowl

1)Turn the head-lift lever on your stand mixer counter- clockwise and the mixer head will pop up. Raise the mixer head until it locks into place.

2)Place the stainless steel bowl on the base and align the two grooves on the base of the bowl with the two notches on the base of the stand mixer. Once in position, turn the bowl clockwise until it locks into place. Figure 1.

3)Turn the head-lift lever counterclockwise to unlock the mixer head. Once unlocked, lower the mixer head until it locks into position. If the mixer head fails to lock into place, check the bowl to make sure that it is properly positioned.