DeLonghi DSM800, DSM700 instruction manual Assembling Your Pasta Maker, Operating Your Pasta Maker

Figure 2

Figure 1

Assembling Your Pasta Maker

1)Optional: For easier pasta making, warm the pasta maker parts in hot water, and then dry thoroughly.

2)Fit the scroll (4) inside the

body (5). Then fit a screen

(3)by putting the notches

over the pins. Figure 1. The screens are numbered:

1: Spaghetti

2: Macaroni

3: Rigatoni

4: Tagliatelle

5:Lasagne

6:Large Macaroni

Operating Your Pasta Maker

1) Make pasta dough according to the directions on your dough recipe.

2)Remove the low-speed outlet cover by sliding the catch and then pull. Figure 2.

3)Hold the catch back and insert the pasta maker, with the feed tube facing you. Turn it from side-to-side until it locks into place.

4)Tighten the ring nut and then switch the stand mixer to speed 3.

5)Drop small pieces of the mix at a time into the feed tube (6). Figure 3. Allow the scroll to clear before continuing. You can push them down gently using the spanner handle. Do not use anything else or push too hard. Your pasta could break.