Metal/Wood Cutting Band Saw | Delta 28-348 instruction

14" Metal/Wood Cutting Band Saw

(Model 28-348)

INSTRUCTION MANUAL

PART NO. 426-03-651-0013 - 1-31-06

Copyright © 2006 Delta Machinery

To learn more about DELTA MACHINERY

visit our website at: www.deltamachinery.com.

For Parts, Service, Warranty or other Assistance,

please call 1-800-223-7278 (In Canada call 1-800-463-3582).

Image 1

Delta 28-348 instruction manual Metal/Wood Cutting Band Saw

Contents

Metal/Wood Cutting Band Saw Important Safety Instructions Safety Guidelines Definitions Stay ALERT, Watch What YOU are DOING, Additional Safety Rules For Band Saws Power Connections Functional Description Unpacking and Cleaning Band SAW Parts Motor Bracket To Cabinet AssemblyMotor to Motor Bracket Dust Chute TOP Plate to Cabinet Stand Door to Stand Sure the Hinge Pins a are Pointed UP AS Shown in FigsDust Port Tighten the Screws AT this Time Hinge Opening is Pointing Down SAW to Stand Disconnect Machine from Power SourceMotor Pulley Belt to SAW and Motor Pulley Are Positioned AS Shown in FIG Table to SAW Table Insert Blade to SAWLength Blades On / OFF Switch To Stand Locking Switch in the OFF Position Operating Controls and AdjustmentsStarting Stopping SAW Tilting the Table To adjust the 90 degree stop Adjusting Table Stops Adjusting Blade Tension Never Track the Blade While Tool is Running Tracking the Blade Changing Speeds Adjusting Lower Blade Guides and Blade Support Bearing CD C Operations Cutting Curves Troubleshooting Guide Trouble Band SAW does not Come UP to Speed Suggested Metal Cutting Blades and Speeds Band SAW Blades Changing the Blades MaintenanceLubrication PARTS, Service or Warranty Assistance Accessories Canadian PORTER-CABLE Delta Service Centers