Delta 28-348 instruction manual Hinge Opening is Pointing Down, Tighten the Screws AT this Time

5.Align the two holes in the hinge (C) Fig. 19, with the two holes in the cabinet door (D). MAKE SURE THAT

THE HINGE OPENING IS POINTING DOWN.

6.Insert #10-24x1/2" socket head cap screws through the holes in the door, and thread the screws into the holes in the hinge. NOTE: DO NOT COMPLETELY

TIGHTEN THE SCREWS AT THIS TIME.

7.Make sure the two hinges are aligned with each other by using a straight edge as shown in Fig. 20.

8.Tighten the four screws securely.

9.Insert the door latch (F) Fig. 21, from the outside, through the hole in the door.

10.Push down on the door latch to snap the latch in place.

11.Slide the two hinges (C) Fig. 22, on the door, over the two hinge pins (A) on the cabinet.

12.To open or shut the door, slide the latch away from the cabinet and pull or push the door.

C

D

Fig. 19

Fig. 20

F

Fig. 21

C

A

C

A

Fig. 22

12