Delta 36-426 instruction manual Assembling Extension Wing, Assembling Switch to Extension Wing

ASSEMBLING

EXTENSION WING

1. Assemble extension wing (A) Fig. 39, to the saw

C

table using three 7/16-20 x 1-1/4″ screws (B) and

lockwashers (C) Fig. 39.

B

A

D

2.With a straight edge (D) Fig. 39, make certain the extension wing (A) is level with the saw table before tightening three screws (B) Fig. 40.

ASSEMBLING SWITCH TO EXTENSION WING

1.Assemble switch (A) Fig. 41, behind the lip of extension wing (B) insert 5/16-18 x 1″ flat head screw (C), then assemble flat washer, and locknut.

2.Fig. 42 illustrates the switch assembled to the extension wing.

Fig. 39

B

Fig. 40

C

B

A

Fig. 41

Fig. 42

19