Delta Electronics RTU-DNET manual Interval time

DeviceNet Remote I/O Communication Module RTU-DNET

Attribute	Access		Name		Range		Default
ID	rule
8	Get		Status word	0~255			N/A
9	Get/Set		Control word		N/A		N/A
10	Get/Set		Diagnostic	1 ~ 65			5 secs
			interval time		secs
			Special
11	Get/Set	module offline		0 ~ 2		1
			treatment
			Special
12	Get/Set		module error	0 ~ 2		1
			treatment
13	Get/Set		RTU-DNET		N/A	0
			configuration
			validation
14	Get/Set		Reset		N/A	0
			RTU-DNET

Explanation

Displaying the status of RTU-DNET. See 4.3 for more details.

For setting up the mode of RTU-DNET, e.g. “H8000” for STOP mode and “H8001” for RUN mode. See 4.3 for more details.

The interval when RTU-DNET executes diagnosis.

How RTU-DNET will react when the special module connected to it is offline.

0:Ignored

1:Alarm

2:Stop DeviceNet IO

How RTU-DNET will react when it detects errors.

0:Ignored

1:Alarm

2:Stop DeviceNet IO

Validating the configuration of RTU-DNET when set to “11”.

Resetting RTU-DNET when set to”10”. After it, the parameter will change to “0” automatically.

„Class 0x9B – Extension module setup parameter object Class attribute

Attribute ID	Access rule	Name	Data type
1	Get	Revision	UINT

Instance 1 ~ 8 (parameters for the 1st ~ 8th special modules)

Attribute	Access
		Name	Range	Default			Explanation
ID	rule
1	Get	Model name	N/A	N/A	Model code for the special module
					The sum of the input data length of
		Length of
2	Get		N/A	N/A	special modules connected.
		input data
					Unit: word
					The sum of the output data length of
		Length of
3	Get		N/A	N/A	special modules connected.
		output data
					Unit: word
4	Get	Status	0 ~ 63	N/A	b0	0		Special module online
						1		Special module offline
					b1	0		Special module normal
						1		Special module in error
					b2	0		Special module and
								configuration consistent

DVP-PLC Application Manual 11