Delta Electronics RTU-DNET manual COM1, Dvp-Sv, Ascii

DeviceNet Remote I/O Communication Module RTU-DNET

(2)Select “Setup” => “Communication Setting” => “System Channel”, and the “Serial Port Setting” dialog box will appear.

(3)Set up the communication parameters in the PC and DVP-SV, e.g. the communication port, address, baud rate and communication format.

Item	Function	Default
COM Port	COM port on the PC to be used to communicate with	COM1
	DVP-SV
Address	Communication address of DVP-SV	01
Baud rate	Communication speed between the PC and DVP-SV	9,600 (bps)
Data Bits		7
	Communication protocol between the PC and DVP-SV
Parity		Even Parity
Stop Bit		1
Mode	Communication mode between the PC and DVP-SV	ASCII

(4) Click on “OK” and return to the main page.

(5) Select “Network” => “Online”, and the “Select Communication Channel” dialog box will appear.

DVP-PLC Application Manual 23