Deni 5000 manual Before First Use, Freezing the Speedee Freeze Canister

5000 Instructions 9/14/01 9:58 AM Page 3

C OMPA CT

Before First Use

1.Remove all packing materials and literature from inside the ice cream maker.

2.Wash the Speedee Freeze™ canister, Clear-Vue™ lid and stir pad- dle in warm soapy water. Rinse and dry all parts thoroughly. NEVER immerse motor top in water or any other liquid. NEVER clean any parts ina dishwasher.

Freezing the Speedee Freeze™ Canister

■Before making frozen desserts, it is very important that the Speedee Freeze™ canister be properly frozen. The Deni Scoop Factory® Compact features a double insulated bowl that requires thorough freezing. We recommend placing the Speedee Freeze™ canister upright in the back of your freezer where the temperature is the coldest.

■Make sure the Speedee Freeze™ canister is washed and thorough- ly dried. For best results, wrap canister in a plastic bag.

■The length of time necessary to properly freeze the canister depends on the temperature in your freezer. Freezing time can vary from 8 –24 hours, depending on freezer temperatures ranging from -30°C/-22°F to -10°C/+14°F.

■Shake the Speedee Freeze™ canister to ensure a properly frozen bowl. The canister should have no liquid moving inside. If you hear liquid, it is not frozen.

■Keep your Speedee Freeze™ canister in the freezer when not in

3use so you can create frozen desserts anytime.

HOW TO OPERATE THE

DENI SCOOP FACTORY® COMPACT

1.Place canister in the freezer overnight, (see freezing the Speedee Freeze™ Canister on pg. 3).

2.Follow the recipes in our instruction booklet. Almost any frozen dessert recipe can be used providing it does not make more than 11/2 quarts.

3.Prepare the ingredients. Note: For best results, leave the mix- ture in the refrigerator for at least 4 hours until thoroughly chilled.

4.Place the stir paddle inside the canister. Be sure the star- shaped knob on the stir paddle faces up.

5.Lock the Clear-Vue™ lid onto the canister. The arrow marked “unlock” on the bottom of the lid should line up with the arrow on the canister. Turn the lid clockwise to lock the lid in place. When placing the lid on the canister, the stir paddle should also lock into the lid.

6.Place the motor on the lid. Press in the button marked “PUSH” on the back of the motor. This will allow the paddle to fit inside the motor.

7.Press on/off switch, located on the top of the motor, to the ON position. It is important to turn the unit on first before pouring in the mixture. The stir paddle rotates while the can- ister remains stationary.