ENGLISH

Getting

1. Home Theater Playback – Playing Back Using Multi-channel System –

Specifications Troubleshooting Information Function Control HDMI Playback Setup Connections Started

Using an HDMI Cable to Connect to an AV Amp or Television

•When connecting with an HDMI cable, press and set it to “HDMI On”.

•DBP-4010UDCI automatically detects audio/video signal supported by the connected HDMI device and outputs the signal. To change the setting, see “HDMI Setup” on the GUI menu

(vpage 23, 24).

NOTE

•When you press and set it to “HDMI On”, no video signals are output from the component video outputs.

•To disable video or audio output from the HDMI terminal, set “Video Out” of “Pure Direct Setup”, which outputs high quality analog audio to “Off”. To enable the HDMI signal output, set the Pure Direct mode to one of the following setting:

•Pure Direct mode“Off” or “User Preset 1” or “User Preset 2” (b)

(“Playing Back High-Quality Audio (Pure Direct Function) ” vpage 38)

b Do this after setting “Pure Direct Setup” – “User Preset 1” or “User Preset 2” – “Video Out” on GUI menu to “On” (vpage 28).

During “HDMI On”

Audio/video signals are output from the HDMI terminal.

When the HDMI video resolution is set to “Auto” as described in “About HDMI Video Resolution Setting” (vpage 13), the DBP-4010UDCI outputs the highest resolution video signal that is supported by the connected equipment.

AV Amp or

TV

)%.*

*/

NOTE

•When audio/video signals are output from the HDMI terminal, no video signals are output from the component terminals.

•When a signal comprising 24 frames per second, such as 1080P24, is output from the HDMI terminal, no video signals are output from the video or S-Video outputs.

During “HDMI Off”

Audio/video is not output from the HDMI terminal.

nConnection to a device with a DVI-D terminal

If you use a HDMI/DVI-D conversion cable (sold separately), HDMI video signals are converted to DVI- D signals, enabling connection to a device with a DVI-D terminal.

NOTE

•In this case, the audio signal is not output. Make the appropriate audio connections for your devices. (vpage 14 ~ 20).

•The video signal will be in RGB format.

•You cannot output to a DVI-D device that does not support HDCP (high-bandwidth digital content copyright protection system).

•Video may not be output depending on the combination of devices.

Required Settings for HDMI Connection

Setting HDMI video output

nMake HDMI Output Signal and HDMI Control Function Settings

“HDMI Setup” (vpage 23, 24)

nMake the Video Output Signal Setting for the Connected Television

“Video Setup” (vpage 24)

nAbout HDMI Video Resolution Setting

•Change the HDMI video resolution by pressing . Switch the output mode as follows. Default settings are underlined.

 

 

Auto

 

Source Direct

 

 

480/576i

 

 

 

480/576P

 

 

 

 

(Auto)

(Source direct)

(480/576 interlaced)

 

(480/576 progressive)

 

 

 

1080P24

 

 

1080P

 

 

 

1080i

 

 

 

 

720P

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(1080 progressive, 24-frame)

(1080 progressive)

 

(1080 interlaced)

(720 progressive)

•If the HDMI resolution is not set to “Auto”, set it to correspond with the resolution of your television. Images will not be projected normally if the television resolution and DBP-4010UDCI’s output resolution do not match.

•Audio and video will be temporarily interrupted if the power of the connected device currently playing back is turned off, or input is switched.

•When you change the HDMI video resolution of the DBP-4010UDCI, it takes from a few seconds up to about 10 seconds for validation between the DBP-4010UDCI and the connected device. Audio/video is not output during this period.

•When outputting deep colour or 1080p, etc., we recommend you use High Speed HDMI cable for enhanced high-quality playback.

When outputting a video signal comprising 24 frames per second from the HDMI terminal, select “1080P24” or “Source Direct” after setting the GUI menu “HDMI Setup” – “I/P Direct” (vpage 23) to “On”.

See overleaf

13