NOTE

•When the HDMI video resolution is set to “1080P24”, HDMI video signals are output from the DBP- 4010UDCI with a resolution of 1080P and a frame rate of 24 frames per second, regardless of the video signals on the disc being played. Because of this, when playing discs containing video signals recorded with a frame rate of something other than 24 frames per second, the movement of the picture may be unnatural. If this happens, set the HDMI video resolution to something other than “1080P24”.

•When the “I/P Direct” (vpage 23) setting is “On” and a disc with a frame rate of 24 frames per second is played, no video signals are output from the video or S-Video outputs.

•When the “I/P Direct” (vpage 23) setting is “Off”, “1080P24” is not displayed.

Setting HDMI Audio Output

•When you press and set “HDMI Setup” – “Audio Setup” to “Auto” (vpage 23) on the GUI menu, audio mode is set according to the connected device.

•When you want to set the HDMI audio output separately, change according to the following table.

•Refer to the owner’s manual of the connected device regarding HDMI audio input specifications compatible with the connected device.

Device to be connected

Setting items

About output signal and speaker settings

Device with the following

 

DBP-4010UDCI outputs a bitstream signal that is decoded

 

by the connected device.

built-in decoder

 

 

 

 

b In this case, you cannot make a speaker setting for HDMI

· Dolby TrueHD

 

 

 

 

audio with the DBP-4010UDCI.

· Dolby Digital Plus

 

Auto

 

Make the setting with the connected device.

· Dolby Digital

 

 

 

 

b When outputting the Dolby TrueHD or DTS-HD audio,

· DTS-HD

 

 

 

 

press

and set “BD Audio Mode” to “HD Audio

· DTS

 

 

 

 

 

 

Output” (vpage 32).

 

 

 

 

 

 

 

 

Outputs multi-channel Linear PCM audio signals with

Device

compatible

with

 

speaker setting by the DBP-4010UDCI.

multi-channel HDMI audio

Multi LPCM

b For speaker setting, on the GUI menu, “Audio Setup”

input, but not capable of

BM On

– “7.1ch

Audio Out”– “Multi Channel” – “Speaker

speaker

setting for

each

Configuration” (vpage 25).

 

channel

 

 

 

b BM : Bass Management (means multi-channel speaker

 

 

 

 

setting)

 

 

 

 

 

 

Device

compatible

with

 

Output of multi-channel Linear PCM audio signals from the

multi-channel HDMI audio

Multi LPCM

DBP-4010UDCI.

input,

and capable of

Perform the speaker setting with the connected device.

BM Off

speaker

setting for

each

b BM : Bass Management (means multi-channel speaker

 

channel

 

 

 

setting)

 

 

 

 

 

 

Device compatible with 2-

 

Downmixed 2-channel Linear PCM audio signals are output

2ch

from the DBP-4010UDCI.

channel HDMI audio input

 

Perform the speaker setting with the connected device.

 

 

 

 

 

 

 

 

Audio signal are not output from the DBP-4010UDCI’s

Device not compatible with

Mute

HDMI terminal.

HDMI audio signal input

Only video signals are output from the HDMI terminal.

 

 

 

 

 

b Make the audio connection.

ENGLISH

 

1. Home Theater Playback – Playing Back Using Multi-channel System –

Getting

n Audio signal from the HDMI output terminal

 

 

 

 

 

 

 

 

 

You can change the audio format and playback number of channels according to the specifications of

Started

checking the specifications of the audio device to be connected as well as the audio format/number

the device to which the DBP-4010UDCI’s HDMI audio output signals are input. Make settings while

 

of channels stored in media and files for playback.

 

 

 

 

 

 

 

 

 

Connections

 

 

 

 

 

 

 

 

 

Setting “HDMI Setup” – “Audio Setup” (vpage 23) on

 

 

 

 

 

Media/Files

Audio format

 

the GUI menu

 

 

 

 

 

 

 

 

 

 

 

 

 

Multi LPCM

 

 

 

 

 

Auto

 

2ch

 

Setup

 

 

 

BM On/Off

 

 

 

 

 

 

 

 

Dolby Digital

Dolby Digitalz1

 

 

 

 

Playback

 

 

 

 

 

 

 

 

Dolby Digital Plus

Dolby Digital Plusz1

 

 

 

 

 

 

 

 

 

 

BD

Dolby TrueHD

Dolby TrueHDz1

 

Multi LPCM

2 ch Downmix

 

 

DTS

DTSz1

 

LPCM

 

HDMI

 

 

 

 

 

DTS-HD

DTS-HDz1

 

 

 

 

 

 

 

 

 

 

 

LPCM

Multi LPCM

 

 

 

 

Control

AVCHD

Dolby Digital

Dolby Digital

 

 

 

 

 

 

 

 

 

 

 

LPCM

Multi LPCM

 

Multi LPCM

2 ch Downmix

 

Function

 

Dolby Digital

Dolby Digital

 

LPCM

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DVD-Video

DTS

DTS

 

 

 

 

 

 

 

 

 

 

 

 

Information

 

LPCM

2 ch LPCM

 

 

 

 

DVD-Audio

LPCM, PPCM

Multi LPCM

 

 

2 ch Downmix

 

 

 

 

 

 

Multi area

 

 

LPCM

 

 

 

 

 

 

 

 

Super audio CDz2

Stereo area

2 ch LPCM

 

 

 

 

Troubleshooting

 

CD layer

 

 

 

 

 

2 ch LPCM

 

 

 

 

 

 

 

 

 

 

 

 

Dolby Digital

Dolby Digital

 

Multi LPCM

2 ch Downmix

 

 

DivX®

 

LPCM

 

 

 

 

 

 

 

 

 

MP3, MP2

 

 

 

 

 

 

CD, MP3, WMA, AAC, LPCM

 

 

 

 

 

 

DTS-CD

 

DTS

 

Multi LPCM

2 ch Downmix

 

Specifications

 

 

 

 

 

 

LPCM

 

 

 

 

 

 

 

 

 

z1 :Multi LPCM signals are output when “BD Audio Mode” is set to “Mix Audio Output ” (vpage 32).

 

Multi LPCM signals are output when outputting HDMI video signals with resolutions of 480i/576i or

 

480p/576p.

 

 

 

 

 

 

 

z2 :Super Audio CD audio signals are output at 44.1 kHz 16-bit.

 

 

 

 

 

Even if “HDMI Setup” – “Audio Setup” on the GUI menu is set to “Auto” (vpage 23), multilinear PCM or downmixed 2-channel linear PCM signals are output if a device that does not support bitstreams is connected.

14