Denon 4010UDCI Adjusting the Picture Quality (Picture Control), Press, 3 with, Correction, , and then press, 2 “Memory 5”) with, About Gamma Correction

ENGLISH

Getting	Adjusting the Picture Quality (Picture Control)
	You can adjust the picture quality to your liking.
						Setting
Started					Setting items		Default
	You can store up to a maximum of 5 values in memory.
						contents
		Press .			DNR
Connections	1 The currently set status is displayed.				Reduce noise in the entire	0 ~ +3	0
					picture.
		Select the memory number you want (“Memory 1” ~
					Contrast	–6 ~ +6	0
	2 “Memory 5”) with			, and then press .	Adjust picture contrast.
Setup					Brightness	0 ~ +12	0
		PICT Memory 5
					Adjust picture brightness.
		Standard
Playback		Memory 1			Enhancer z3	0 ~ +11	0
					Strengthens the contours of
		Select the item you want to change
					the picture.
	3 with		.
					Gamma Correction z1		G0 = 24 / G1 = 32
							G2 = 48 / G3 = 64

z1：This is not available for HDMI output.

z2：Effective only for the 480i video signal from the video output terminal, S video output terminal, and component video output terminal.

z3：This has no effect with the video and S-Video outputs.

z4：This has no effect with the video and S-Video outputs when playing PAL video.

About Gamma Correction

When you select “Gamma Correction”, and then press , you can

change the setting with .

In the example of the graph below, the horizontal axis shows the brightness level of the pictured recorded on the disc. The vertical axis shows the brightness of the picture output by the DBP-4010UDCI.

PICT Memory 5 Gamma Correction

HDMI	Memory 1	V.Position	0	Adjust	video brightness in
		DNR	0	detail.	G0 ~ 9	G4 = 80	/ G5 = 96
Control
		Contrast	0			G6 = 128	/ G7 = 160
	4 Change the setting with					G8 = 192	/ G9 = 224
			.	Sharpness (medium range)
Function
				z1, 3	picture sharpness –6 ~ +6		0
	b Refer to the table on the right regarding contents of items which			Adjust

255

G0:024

Information	can be set.		for the medium frequency
			range.
	n When Finishing Picture Adjustment		Sharpness (high range) z3	–6 ~ +6	0
			Adjust picture sharpness for
	Press	during picture adjustment.
			the higher frequency range.
	n When Outputting Standard Picture Quality without		Hue (color tone) z4	–6 ~ +6	0
	Using Picture Adjustment		Adjust the green and red

00255

•On adjusting the brightness on the output side of bright parts on the disc side, the normally hard to see bright parts become clearly discernible images.

PICT Memory 5 Gamma Correction

Troubleshooting	Press	and	to select “Standard” and then press	.·	color balance.
					White Level	–5 ~ +5	0
					Adjust the white level.
Specifications	The picture adjustment set values are retained in memory even after				Black Level z3	–5 ~ +5	0
					Adjust the black level.
	the power is turned off.
					Chroma Level

255

G0:024

Adjust the color density.			–6 ~ +6	0
Setup Levelz2			0 IRE
Adjust the black areas of the				7.5 IRE
			7.5 IRE
image.
H.Position z3			–7 ~ +7	0
Adjust the left/right position.
V.Position z3			–7 ~ +7	0
Adjust	the	top/bottom
position.

00255

•On adjusting the brightness on the output side of dark parts on the disc side, the normally hard to see dark parts become clearly discernible images.

n Resuming Initial Values after GammaCorrection

Presswhile a graph is displayed.

33