ENGLISH

Getting

 

Audio Setup

 

 

 

 

 

 

 

 

 

 

 

Setting items

 

Setting contents

Started

 

Source Direct

 

 

 

 

Off : Enable the speaker and subwoofer settings.

 

 

 

 

 

 

 

 

Disable

the

speaker

and

On : 50kHz : Output the disc contents as is. When playing Super Audio

Connections

 

subwoofer

settings

and

CD, output up to 50 kHz audio signals.

 

output the disc audio as is.

On : 100kHz : Output the disc contents as is. When playing Super Audio

 

 

 

 

NOTE

 

 

 

 

 

 

CD, output up to 100 kHz audio signals.

 

 

 

 

 

 

 

 

 

 

 

Set to within the playback

•Setting “On: 50 kHz” or “On: 100 kHz” enables full-range playback on

 

 

frequency

band

of

the

Setup

 

amplifier

you

are

to

use:

all channels recommended for DTS. (Note that this results in a 5 dB

 

“On” at “50 kHz” or “100

increase in subwoofer volume, and a 15 dB increase with Super Audio

 

 

kHz”.

Setting

outside

the

CD). This also allows you to play back the 6-channel source of DVD-

Playback

 

frequency

band

can result

Audio recorded on all channels with the full frequency range. In this

 

and even fire.

 

 

 

 

•When set to “On: 50 kHz” or “On: 100 kHz”, all speaker sizes are set to

 

 

in damage to your amplifier

case, make an analog connection according to disc operating manual.

HDMI

 

 

 

 

 

 

 

 

 

“Large” and “Yes” is set for the subwoofer.

 

 

 

 

 

 

 

 

 

•Even when set to “On: 50 kHz” or “On: 100 kHz”, “Channel Level” and

 

 

 

 

 

 

 

 

 

 

Control

 

 

 

 

 

 

 

 

 

“Distance” settings are available.

 

Compression

 

 

 

 

Auto : Automatically compress Dolby TrueHD audio dynamic range. The

 

 

 

 

 

 

 

 

Compresses

the

dynamic

sound is not compressed when playing signals other than Dolby TrueHD

Function

 

range

of

Dolby

TrueHD/

signals.

 

Dolby

Digital/Dolby Digital

Off : Dynamic Range compression is not applied.

 

 

 

 

Plus audio. At night or other

Low : Set minimum dynamic range compression.

Information

 

times when you cannot play

Middle : Set middle dynamic range compression.

 

back at high volume, this

High : Set maximum dynamic range compression.

 

 

 

 

compensates

by

reducing

 

 

 

high

level

sounds

and

 

 

 

increasing low level sounds.

 

Troubleshooting

 

BD Effect Sound

 

 

On : Outputs BD effect sound.

 

Sets for a click sound and

Off : Does not output BD effect sound.

 

 

 

 

other

outputs

during

BD

 

 

 

popup menu operations.

 

Specifications

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Setting items

Setting contents

BD Re-Encoder

Auto : Outputs primary audio (main audio) in the same type of audio

Sets the

format during

format. Dolby Digital/Dolby Digital Plus/Dolby TrueHD are output as

output of the BD’s Mix Audio

Dolby Digital, DTS/DTS-HD are output as DTS and Linear PCM is output

signal from the digital output

as Linear PCM.

terminal.

 

Dolby Digital：Outputs to the digital audio output terminal (optical/

 

 

coaxial) with Dolby Digital.

 

 

DTS : Outputs to the digital audio output terminal (optical/coaxial) with

 

 

DTS.

 

 

Valid when “BD Audio Mode” is set to “Mix Audio Output” (vpage

 

 

32).

Digital Out

 

Bitstream : Outputs a bitstream signal. Converts Dolby TrueHD, Dolby

Set the audio signal of digital

Digital Plus to Dolby Digital, and DTS-HD to DTS for output.

audio output.

PCM : Output the downmixed audio signal to 2ch LPCM.

For more information on each

PCM Down Sampling : Convert sampling frequency audio greater than

audio signal, refer to “Audio

48 kHz to a 48 kHz 2ch LPCM audio output signal.

Signal from the Digital Audio

 

Output

(Optical/Coaxial)

•When outputting CD, etc. to a digital recording device such as the CD

Terminal” (vpage 17).

recorder, convert to PCM or PCM down sampling.

 

 

 

 

• When a disc with recorded Linear PCM or PPCM (Packed PCM) is played

 

 

back, this outputs Linear PCM irrespective of the setting.

 

 

 

Downmix

 

Lt/Rt : Signals are converted to Dolby Surround compatible 2-channel

Set the method used to

audio signals for output. This setting is valid for DTS-HD, DTS Digital

convert a multi-channel

Surround, Dolby Digital Plus and Dolby Digital audio signals. (If the

audio signal to a 2-channel

connected AV Amp is Dolby Pro Logic compatible, AV Amp plays back

signal.

 

using surround audio.)

Stereo : Outputs by converting to the 2ch (stereo) audio.

NOTE

In order to enable the “Lt/Rt” setting when playing back BD, set “BD

Audio Mode” to “HD Audio Output” (vpage 32).

27

Remote control operation

:Displaying the menu

:Moves the cursor

:Decision the setting

:Return to previous menu

buttons

Cancel the menu

(Up/Down/Left/Right)