Denon 4010UDCI Connection to an AV Amp with No HDMI Audio Input

Match the shapes

ENGLISH

Getting	1. Home Theater Playback – Playing Back Using Multi-channel System –
	Copyright protection system
Started
	both the player and TV or the AV Amp need to support the copyright protection system known as
	In order to play back digital video and audio such as BD-Video or DVD-Video via HDMI connection,
Connections	HDCP（High-bandwidth Digital Content Protection System). HDCP is copyright protection technology
	comprised of data encryption and authentication of the connected AV device. The DBP-4010UDCI
	supports HDCP.

	NOTE
Setup	•If a device that does not support HDCP is connected, video and audio are not output correctly. Read the
	owner’s manual of your television or AV Amp for more information.
Playback	• The audio signal from the HDMI output terminal (sampling frequency, number of channels, etc.) may
	will be automatically output even when playing back 7.1 channels by the DBP-4010UDCI. In this case,
	be limited by the HDMI audio specifications of the connected device regarding permissible inputs. For
	example, if the HDMI audio specification of the connected device is 5.1 channels, 5.1-channel audio
HDMI	analog audio output will also be 5.1-channel.
	•Audio signal input may not be supported depending on the HDMI compatible monitor (projector, etc.)
FunctionControl	being used.
	When the DBP-4010UDCI is connected to this kind of device, audio signals are not output from the
	HDMI terminal.
Information
Troubleshooting
Specifications

Connection to an AV Amp with No HDMI Audio Input

When playing back Dolby Digital Plus/Dolby TrueHD/DTS-HD audio recorded on a BD disc, the DBP- 4010UDCI outputs Dolby Digital or DTS bitstream from its digital audio output terminal.

AV Amp

"6%*0

$0"9*"-

*/

015*$"- */

NOTE

•Dolby TrueHD/Dolby Digital Plus/DTS-HD audio signals are not output with this connection.

When outputting Dolby TrueHD/Dolby Digital Plus/DTS-HD audio signals, do so with an HDMI connection (vpage 13, “Using an HDMI Cable to Connect to an AV Amp or Television”).

• Super Audio CD’s DSD signal cannot be output. Also, during CD layer playback, 44.1 kHz/16-bit Linear PCM is output.

•Do not output DTS audio signals to an AV Amp that does not support DTS. Playing back a BD/DVD disc with recorded DTS content can generate noise and even damage your speakers.

•When connecting with an optical transmission cable (sold separately), make sure the plug shape aligns with the socket, and insert fully.

15