Denon 4010UDCI DENON LINK Connection q Making a Jitter-freeConnection, DENON LINK Connection w Making a Normal Connection, Connection to an AV Amp with No HDMI Video Input

ENGLISH

Getting	1. Home Theater Playback – Playing Back Using Multi-channel System –
	DENON LINK Connection q Making a Jitter-free Connection
Started
	BD
Connections	When you connect the DBP-4010UDCI to a DENON LINK 4th compatible AV Amp using DENON
	LINK cable and HDMI cable, during BD playback the DBP-4010UDCI’s circuit operates with the AV
	Amp’s master clock signal. (The clock control indicator of the DBP-4010UDCI lights.) This enables
	transmission of high-quality digital audio with minimal jitter.
	AV Amp
Setup	"6%*0
	)%.*
Playback	*/
	%&/0/ -*/,
HDMI	•When using DENON LINK 4th functions, press the	and set to “HDMI On”.
Control
	NOTE
Function	• The jitter-free function does not work except during BD playback. In this case, the video signal is
	output from the HDMI OUT terminal, and the audio signal from the DENON LINK terminal.
Information
Troubleshooting
Specifications

DENON LINK Connection w Making a Normal Connection

•When connecting to a DENON LINK-compatible AV Amp, the multi-channel signals of DVD-Audio discs, Super Audio CDs, etc., can be transferred as such in digital format.

•DENON LINK connection requires that the version of AV Amp to be connected match the DBP- 4010UDCI version. Check the version of the AV Amp, and then on the GUI Menu, set “DENON LINK Setup” – “DENON LINK Mode” (vpage 28).

If the DBP-4010UDCI and AV Amp versions do not match, audio cannot be output correctly.

AV Amp

"6%*0

%&/0/
-*/,

NOTE

DENON LINK does not support BD audio transmission.

•DENON LINK supports digital transmission up to 24 bit/2 ch at 192/176.4 kHz, and up to 24 bit/6 ch at 96 kHz or less.

•When you have made a DENON LINK connection, the DBP-4010UDCI’s speaker setting becomes invalid. (Make the speaker setting on the connected AV Amp)

•DENON LINK 2nd cannot transmit multi/stereo area audio of Super Audio CD.

Connection to an AV Amp with No HDMI Video Input

•Check the video terminals and make the connection to one of them.

•When connecting using the component video outputs, press and set it to “HDMI Off”.

AV Amp

7*%&0 7*%&0
*/

4
7*%&0
*/

$0.10/&/5

7*%&0
*/

: 1# 13

17