Denon 4010UDCI 2. Playing Back with a Direct Connection to a TV, 3. Playing Back 2-ChannelAudio, Connecting to a Device with Analog 2-channelAudio Input

2. Playing Back with a Direct Connection to a TV

Check the television’s audio and video terminals and make the connection to one of them.

Audio terminals		Video terminal	S-Video input		Component video	HDMI input
			terminal		input terminal	terminal
TV		TV	TV		TV	TV
"6%*0		7*%&0	7*%&0		7*%&0
"6%*0		7*%&0	4 7*%&0		$0.10/&/5 7*%&0	)%.*
*/		*/	*/		*/	*/
3	-				: 1# 13
R	L
	(supplied)	(supplied)	(Sold		(Sold	(Sold
			separately)	separately)		separately)
R	L

NOTE

Do not connect the DBP-4010UDCI’s video output via a VCR (Video Cassette Recorder). Some media contain copy prohibit signals, which will disturb the screen image.

When playing NTSC disc, DBP-4010UDCI’s video output becomes NTSC signal format. When playing PAL disc, DBP-4010UDCI’s video output becomes PAL signal format.

nWhen connected to the television’s component video input terminal

•The DBP-4010UDCI’s component video output supports 480i/576i/480p/576p/720p/1080i output. Match the output to the corresponding resolution of the connected television by setting, on the GUI menu: “Video Setup” – “Component Resolution” (vpage 24). Images will not be projected normally if the television resolution and DBP-4010UDCI’s output resolution do not match. Copyright protected DVD is output in 480i/576i or 480p/576p.

NOTE

When you press and set it to “HDMI On”, no video signals are output from the component video terminals. When using the component video terminals, set HDMI mode to “HDMI Off”.

ENGLISH

n When connected to the HDMI input terminal			Getting
See “Required Settings for HDMI Connection” (vpage 13) for HDMI video output and audio output
Outputting both digital video and digital audio signals.
settings.			Started
3. Playing Back 2-Channel Audio			Connections
Connecting to a Device with Analog 2-channel Audio Input
Terminal with Stereo Pin Plug Cable			Setup
When connecting using the analog 2-channel audio output terminals
			Playback
"6%*0
Stereo
"6%*0	L	L	HDMI
-
*/			FunctionControl
3	R	R
For software recorded in multi-channel, analog signals that have been down-mixed into 2 channels			Information
are output.
When connecting using the analog 7.1-channel audio output terminals
On the GUI menu, select “Audio Setup” – “7.1ch Audio Out”, and set it to “2 channel” (vpage 25).			Troubleshooting
Stereo
"6%*0
"6%*0
*/
-	L	L
3	R	R	Specifications
For software recorded in multi-channel, analog signals that have been down-mixed into 2 channels
are output.

18