ENGLISH

[1]2-channel mode settings

In the auto decode mode, it is possible to automatically conduct multi-channel playback in the Dolby Digital or DTS surround mode or play in the stereo 2-channel mode (AUTO STEREO mode: factory default setting). For 2-channel input signals, one of four play modes can be set with the 2-channel mode setting (Auto Stereo, Dolby Pro-Logic II Cinema, Dolby Pro-Logic II Music and Dolby Pro-Logic).

When the function is set to VCR, CDR/TAPE or TUNER, the “Auto Stereo” 2-channel mode cannot be selected. To play in stereo, set the surround mode to “STEREO” (page 35).

1

POWER

 

1, 3

1

VCR POWER

 

TV POWER

CH

TV/VCR SLEEP

 

CALL

+10

0

 

DISPLAY

RETURN

INPUT MODE SURROUND

 

3

Select the desired 2-channel

 

 

 

 

decode mode using the (

and

 

) cursor buttons on

 

 

the remote control unit.

 

•The mode switches as follows each time one of the buttons is

pressed:

Remote control unit

AUTO ST PLII CINEMA

MENU

 

 

FUNCTION

1

3

ENTER

 

3

MODE

 

 

 

 

 

 

 

VOLUME

 

BAND

 

 

 

 

 

 

 

MUTE

 

CH

 

SHIFT

 

 

 

NTSC/PAL

STATUS

 

TU

 

MEMO

 

SUB TITLE

AUDIO

ANGLE

TOP MENU

 

PRO LOGIC PLII MUSIC

If the AUTO DECODE/2CH MODE button on the main unit is pressed when the mode is already set to AUTO DECODE, the mode switches to the 2-channel mode. The mode switches as follows each time the button is pressed.

AUTO STEREO PLO LOGICII C

PROG/DIRECT REPEAT A-B REPEAT

RANDOM

CH.SELECT

T.TONE

SDB/TONE

SURR.PARA

SETUP

 

 

2

CDR/MD/TAPE TUNER/TV/VCR

DVD

 

 

REMOCON MODE

 

1

Set the surround mode to “AUTO DECODE”.

 

 

• “AUTO DECODE” is displayed, then the normal display

 

reappears.

PRO LOGIC PLO LOGICII M

The Auto Stereo mode can be selected when the function is set to DVD, TV/DBS or V.AUX.

Once the surround parameters have been set, stop operating buttons. After several seconds the display returns to normal and the settings are automatically validated.

SURROUND

FUNCTION

SURROUND

MODE

/ SELECT

 

Main unit

Main unit

Remote control unit

If the mode is set to anything other than AUTO DECODE, the AUTO DECODE mode can be set using the AUTO DECODE/2CH MODE button on the main unit.

2

Press the SURR.PARA button on the remote control unit and

 

 

select the 2-channel decode mode.

 

 

 

SURR.PARA

 

 

 

 

 

 

 

 

Remote control unit

This can be selected when the digital input consists of no signal, PCM signals, Dolby Digital 2-channel signals, as well as when the analog input is selected.

NOTES:

•The 2-channel decode mode cannot be set when Dolby Digital 5.1-channel signals or DTS signals are being input.

•The 2-channel mode setting is stored in the memory individually for the DVD, TV/DBS and V.AUX modes.

41