Denon ADV-1000 19USING THE TIMER, SET TIME, Adj, AM12:00, PM7:00, PM7:30, Time

19USING THE TIMER

(1)Setting the current time (12-hour display)

Example: To set the current time to “7:30 p.m.”

4,6

1	2,3,5,7
1	Turn on the power.
	ON / STANDBY

Green

Main unit

2	Press the TIMER/SET button and hold it in for at least 2
	seconds.	TIMER/SET
	• “SET TIME” is displayed.
	SET TIME
		Main unit
	If the time is already set, “EVERYDAY” is displayed. Turn
	the FUNCTION/SELECT dial to display “SET TIME”, then
	continue on to step 3.
3	Press the TIMER/SET button.
	• “Adj” is displayed and the hours’ place in the time display
	flashes.
		TIMER/SET
	Adj.	AM12:00

Main unit

ENGLISH

4	Turn FUNCTION/SELECT dial to set the hours’ place to
	“PM7”.
	•	The “PM7” flashes in the hours’ place.
			FUNCTION
			/ SELECT
		Adj.	PM7:00
			Main unit
5	Press the TIMER/SET button.
	•	The “PM7” in the hours’ place stops flashing, remaining lit,
		and the minutes’ place starts flashing.
			TIMER/SET
		Adj.	PM7:00
			Main unit
6	Turn the FUNCTION/SELECT dial and set the minutes’ place
	to “30”.
	•	The “30” flashes in the minutes’ place.
			FUNCTION
			/ SELECT
		Adj.	PM7:30
			Main unit
7	Press the TIMER/SET button to start the clock running.
	•	The time is set and the clock starts counting the time.
			TIMER/SET
		Time	PM7:30

Main unit

To check the current time when something else is displayed, press the TIMER/SET button once. The current time appears and remains displayed until another operation is performed.

When the TIMER/SET button is pressed again while the time is displayed, after which the normal display reappears.

The time can be displayed by pressing the TIMER/SET button while the power is in the standby mode. (The power is now no longer in the energy-saving standby mode.) When the TIMER/SET button is pressed again while the time is displayed, after which the display turns off and the power is set back to the energy-saving standby mode.

69