Denon ADV-1000 23TROUBLESHOOTING, 2Are all the connections correct, 2Are you following the instructions in the manual

ENGLISH

23TROUBLESHOOTING

Check again before assuming the player is malfunctioning2Are all the connections correct ?2Are you following the instructions in the manual ?2Are the speakers and other components operating properly ?

If this unit does not seem to be functioning properly, check the table below. If this does not solve the problem, this unit may be damaged. Turn off the power, unplug the power cord from the power outlet, and contact your store of purchase or nearest Denon sales office.

	Symptom				Cause					Measures	Page
	DISPLAY not lit and sound not produced	•	Power cord not plugged in securely.						• Check the insertion of the power cord plug.		8
	when power switch set to on.
etc.
		•	Speaker cords not securely connected.						•	Connect securely.	14
broadcasts,		• Improper			position of	the	audio function		• Set to a suitable position.		35
			button.
	DISPLAY lit but sound not produced.	•	Volume control set to minimum.						• Turn volume up to suitable level.		36
		•	MUTING is on.						•	Switch off MUTING.	37
FM		•	Digital	signals not		input	Digital	input	•	Input digital signals or select input jacks to	36
			selected.							which digital signals are being input.
and
tapes		• Connections between the video output jack							• Check whether the connections are correct.		9, 10, 12
			of this unit and the input connector of the
discs,
			monitor are incomplete.
	Monitor doesn't display an image.	• The input			setting of	the	monitor	TV is	• Set the input switching of the TV to the jack		—
the			different.							to which the video input is connected.
		•	The video signals of the various devices are						• Make settings uniform for either composite		10, 12
to
			not uniform.							video or S-video connectors.
listening
	The program cannot be copied from DVD	• Almost all movie software contains a copy							• A copy cannot be made.		—
when	to the VCR.		prevention signal.
problems		• Power		is	not being supplied to the				• Switch on the power of the subwoofer.		—
			subwoofer.
	The subwoofer does not produce sound.	•	The subwoofer setting is made to "No" in						•	Change the setting to “Subwoofer” in the	26
Common			the setup.							setup.
		•	The output of the subwoofer has not been						• Make the proper connections.		14
			connected.
	The test tone is not output.	•	The surround mode is set to a mode other						• Set to auto decode.		40
			than auto decode.
		•	Batteries dead.						• Replace with new batteries.		18
unit		• Remote control unit too far from this unit.							•	Move closer.	18
		• Obstacle			between this unit and remote				•	Remove obstacle.	18
control
			control unit.
	This unit does not operate properly when	•	Different button is being pressed.						• Press the proper button.		17
	remote control unit is used.	•	<and >ends of battery inserted in reverse.						•	Insert batteries properly.	18
Remote
		• The mode selection of the remote control is							•	Press the remote control mode selection	17
			not properly selected. The DVD mode, AV							button for the item you wish to operate. To
			mode, or audio mode is not properly							operate this unit, use with the DVD mode.
			selected.

85