Denon ADV-1000 EVERYDAY, Timer FUNC, Timer DVD, ENGLISH, AM12:00, timer settings, 4,6,8,10,12,14, Turn on the power, (2) Everyday timer, timer setting mode

ENGLISH

(2) Everyday timer

Description of timer

•The timer can be used to switch the power between the ON and STANDBY (OFF) modes once every day at the same time. (Everyday timer)

•The timer can be used to play DVDs, CDs or TUNER.

Before setting the timer

•Set the current time.

Be careful to set the right time.

Checking the timer settings

• Use the same procedure as when setting the timer to check the

timer settings.

q Press the TIMER/SET button for at least 2 seconds to set the

timer setting mode.

w Now press the TIMER/SET button again repeatedly to display

the timer start function, the start time and end times.

e After the end time (minutes) is displayed, the timer standby

(3) Setting the Everyday timer

Example: To listen to a CD from 12:35 p.m. to 12:56 p.m.

4,6,8,10,12,14

1,162,3,5,7,9,11,13,15

•Perform this operation after setting the current time (steps 1 to 7 on page 69).

1	Turn on the power
	• Load a CD into the main unit for the	ON / STANDBY

setting is displayed, and when the TIMER/SET button is pressed

again the display returns to as it was before the timer was set.

Changing the timer settings

purpose of timer play.

Green

•Reset the timer using the new settings.

•The previous settings are cleared when they are replaced with the new settings.

Clearing the timer settings

•With “Step 4 to 12” displayed, press the TIMER/SET button for at least 2 seconds. All the timer settings are cleared.

•Press the TIMER/SET button again for a least 2 seconds, the display returns to as it was before the timer was set.

Turning the timer off

•Press the TIMER/SET button, and when “T.Stdby” is displayed, turn the FUNCTION/SELECT dial to select “OFF”. (The display’s mark turns off.)

If there is a power failure

•If there is a power failure or if the power cord has been unplugged, the clock display flashes once the power comes back on, the clock resumes counting, and if the timer was set the timer operates according to the clock. Be sure to correct the current time setting.

			Main unit
2	Press the TIMER/SET button for at least 2 seconds.
	• If the time is set, “EVERYDAY” is displayed.
			TIMER/SET
		EVERYDAY
			Main unit
	“SET TIME” is displayed when the time setting has not
	been made. Perform operations 3 to 7 of Page 69, then
	perform the timer setting again
3	Press the TIMER/SET button.
	• “Timer FUNC” is displayed.
			TIMER/SET
		Timer FUNC
			Main unit
4	Setting the timer start function.
	Set the function to “DVD”.		FUNCTION
			/ SELECT
		Timer DVD
			Main unit
5	Press the TIMER/SET button.
	• The timer setting mode is set and the timer start time
	setting can be made.
			TIMER/SET
	On	AM12:00

Main unit

70