Denon ADV-1000 PM12:00, PM12:35, Off, Off PM12:00, PM12:56, T.StdbyONOFF

Setting the timer start time

6	Set the hours’ place to “PM12”.		FUNCTION
			/ SELECT
	On	PM12:00
7			Main unit
	Press the TIMER/SET button.		TIMER/SET
	• The “PM12” in the hours’ place is
	stored in the memory.
	On	PM12:00	Main unit
8	Set the minutes’ place to “35”.		FUNCTION
			/ SELECT
	On	PM12:35
			Main unit
9	Press the TIMER/SET button.
	• The start time is stored in the memory, and the end time
	can now be set.		TIMER/SET
	Off	AM12:00
			Main unit
10	Setting the timer end time		FUNCTION
	Set the hours’ place to “PM12”.		/ SELECT

Off PM12:00

Main unit

11 Press the TIMER/SET button.

•The “PM12” in the hours’ place is stored in the memory.

			TIMER/SET
	Off	PM12:00
12			Main unit
	Set the minutes’ place to “56”.		FUNCTION
			/ SELECT
	Off	PM12:56
			Main unit

13 Press the TIMER/SET button. TIMER/SET

• The end time is stored in the memory

•“T.Stdby” is displayed and the

timer can now be turned on or off. Main unit

ENGLISH

14	Set the timer standby mode to on or off.
	• “ON” or “OFF” (the one that has been selected) flashes.
	Select “ON” if you want the timer to operate. (When set
	to “ON”, the	mark appears on the display.)

FUNCTION

/ SELECT

T.StdbyONOFF

Main unit

Select ON/OFF. If an operation is not performed within 4 seconds, the setting will be made automatically and there will be a return to the normal display. (Operation 15 is not necessary.)

15	Press the TIMER/SET button.	TIMER/SET
	• This completes the setting of the
	timer.
		Main unit
16	Turn off the main unit’s power.	ON / STANDBY
	• The power is set to the standby	Orange

mode.

•If the timer standby mode is set to

“ON”, the power LED is lit orange.

•The disc starts playing when the

timer start time is reached.		Main unit
When the display’s	mark is lit or the power LED is lit orange

when the power is in the standby mode, the timer will operate at the same times every day. (Everyday timer)

If you do not want the timer to operate, press the TIMER/SET button to display “T.Stdby” and set to “OFF”.

(The display’s mark turns off.)

If you make a mistake when setting the timer, with steps 5 to 12 press the TIMER/SET button and hold it in for at least 2 seconds to return to step 3, and start over from there.

NOTES:

•If the current time is not set, the timer standby setting cannot be set to “ON”. Be sure to set the current time before turning on the timer.

•The timer will operate as long as it is turned on, even if the time setting is off due to a power failure. If you want the timer to operate correctly, be sure the current time is properly set.

•If the timer start time is reached while the power is turned on, the set operates as set for the timer. (The timer settings are given priority.)

•Be sure to set the power to the standby mode to operate the timer.

2To Listen to the TUNER with the Everyday Timer

•Set “Timer TUNER” in Step 4, then press the TIMER/SET button.

•“ P--FM....M” will be displayed. Use the FUNCTION/SELECT dial to select the preset channel on which you would like to receive with the timer, then press the TIMER/SET button.

•Hereafter, the same procedure is performed from Step 6.

71