Denon ADV-1000 1,3, P13, ENGLISH, seconds, Example:, Example:, flashing, completed, Presetting, P23 / P33 / P03, the Memory button, in the changes P13, Starting with a P13

ENGLISH

(3)Presetting FM and AM stationsExample: Presetting FM station (currently tuned in) at preset number P03

MODE

				VOLUME
	BAND				2
2				MUTE
	CH		SHIFT
			NTSC/PAL	STATUS
	TU		MEMO		1,3
	SUB TITLE	AUDIO	ANGLE	TOP MENU
	PROG/DIRECT	REPEAT A-B	REPEAT	RANDOM
	CH.SELECT	T.TONE	SDB/TONE	SURR.PARA
	SETUP	CDR/MD/TAPE TUNER/TV/VCR		DVD

Before operating the remote control unit!

TUNER/TV/VCR

Be sure to press the proper remote control mode selector button to set the remote control unit to the AV mode.

1	Tune in the broadcast station that is to be preset and press
	the Memory button.
	• A “P0 -” (“P1-”, “P2-” or “P3-”) indication flashes for 10

seconds.

NTSC/PAL

MEMO

2	While the “P0 -” (“P1-”, “P2-” or “P3-”) indication is flashing,
	use the shift button and the channel (CH) buttons (–, +) to

display the preset number “P03”.

Each press of the shift button adds 10 to the current preset number in the range of P01 to P40.

Example:
Starting with a P13	CH	SHIFT
setting, each press of
the shift button results
in the changes P13 /
P23 / P33 / P03 /		Remote control unit
P13 /...

Example:

Starting with a P00 setting, each press of the shift button results inthe changes P0- /P10 / P20 / P30 / P40 / P10 /...

3	Press the MEMORY button while the “P03” display is
	flashing.
	• The “P03” display will light and presetting will be

completed.

NTSC/PAL

MEMO

Remote control unit Remote control unit

Presetting•Up to 40 AM or FM stations can be preset using this procedure.

•In addition to the reception frequency, the reception mode (monaural or auto) is also preset, so check the display when presetting stations.

•If a station is preset at a number where a station is already preset, the previous station is replaced with the new station.

•The preset memory is not cleared when the power cord is unplugged.

POWER

VCR POWER

(4) Listening to preset stations

TV POWER

Example: Listening to the station preset at number P03 (This operation is only possible from the remote control unit.)

ENTER

MODE

		VOLUME
	BAND	1
1
		MUTE
	CH	SHIFT
		NTSC/PAL STATUS
	TU	MEMO

Before operating the remote control unit!

TUNER/TV/VCR

Be sure to press the proper remote control mode selector button to set the remote control unit to the AV mode.

SUB TITLE	AUDIO	ANGLE	TOP MENU
PROG/DIRECT	REPEAT A-B	REPEAT	RANDOM

CH.SELECT T.TONE SDB/TONE SURR.PARA

1	Press the remote control shift button and the channel (CH)
	button (–, +) and select preset number “P03”.

SETUP CDR/MD/TAPE TUNER/TV/VCR DVD

REMOCON MODE

CH SHIFT

Remote control unit

53