Denon ADV-1000 ENGLISH, (4)Setting the sleep timer (remote control unit only)

ENGLISH

(4)Setting the sleep timer (remote control unit only)

•The included remote control unit can be used to turn the power to the standby mode after a maximum of 120 minutes. (Sleep timer)

•Use this function to automatically switch the power to the standby mode after a specific amount of time (minutes).

Example: To set the power to the standby mode in 50 minutesaccording to the clock. Be sure to correct the current time setting.

1	Select and play the desired function.
2	Press the SLEEP button.
	• “120” is displayed and the “SLEEP” indicator flashes.
	SLEEP
	120
	SLEEP
	Remote control unit
	The display switches as follows each time the SLEEP
	button is pressed:

	120	90	60		50	40	30	20	10
				“SLEEP” indicator off
3	When the “SLEEP” indicator is flashing, press the SLEEP
	button again until “50” is displayed.

•“50” is displayed and the “SLEEP” indicator flashes.

SLEEP

50

SLEEP

NOTES:

•If the SLEEP button is pressed while the sleep timer is operating, the setting returns to 120 minutes. Make the setting over.

•If the sleep timer and everyday timer settings overlap, the sleep timer has priority.

8:00p.m. 9:00p.m. 10:00p.m.

Everyday timer
setting	ON	OFF
+
Sleep timer
setting	ON	OFF

If the timers overlap like this, the timer operates as follows:

8:00p.m. 9:00p.m. 10:00p.m.

Timer operation

ON OFF Does not operate

•Also, the everyday timer will not operate if its start time is set within the time during which the sleep timer is operating.

8:00p.m. 9:00p.m. 10:00p.m.

Everyday timer	Does not operate
setting	ON	OFF
+
Sleep timer
setting	ON	OFF

•The remaining time of the sleep timer can be checked with the STATUS button.

	Remote control unit
	• After 4 seconds, the display returns to as it was before the
	sleep timer was set, and the “SLEEP” indicator stops
	flashing, remaining lit. (This completes the sleep timer
	setting.)
4	The power is set to the standby mode 50 minutes later.

To turn the sleep timer off, press the SLEEP button repeatedly until the “SLEEP” indicator turns off. The sleep timer can also be turned off by press the power button on the main unit or the remote control unit to turn the entire system’s power to the standby mode.

72