•Parameters

Large...................Select this when using speakers that have sufficient performance for reproducing bass sound below the frequency set for the

 

Crossover Frequency mode.

Small...................

Select this when using speakers that do not have sufficient performance for reproducing bass sound below the frequency set

 

for the Crossover Frequency mode. When this is set, bass sound with a frequency below the frequency set for the Crossover

 

Frequency mode is sent to the subwoofer.

 

When this setting is selected, low frequencies of below the frequency set for the Crossover Frequency mode are assigned

 

to the subwoofer.

None……............

Select this when no speakers are installed.

Yes/No….............

Select “Yes” when a subwoofer is installed, “No” when a subwoofer is not installed.

2spkrs/1spkr .......

Set the number of speakers to be used for the surround back channel.

If the subwoofer has sufficient low frequency playback capacity, good sound can be achieved even when “Small” is set for the front, center and surround speakers.

For the majority of speaker system configurations, using the SMALL setting for all five main speakers and Subwooofer On with a connected subwoofer will yield the best results.

Selecting the Surround Speakers for the different surround modes

This screen is displayed when using both surround speakers A and B.

•At this screen preset the surround speakers to be used in the different surround modes.

1

When either “Large” or “Small” has been set for both speakers A and B

 

 

on the System Setup Menu (when using both A and B surround

 

speakers), the surround speaker setting screen appears.

 

Select the surround speakers to be used in the different surround modes.

 

• To select the surround mode

• To select the surround speaker

A:When using surround speakers A

B:When using surround speakers B

A+B: When using both surround speakers A and B

2

Enter the setting.

 

 

When “Front” is set to “Large” and “Subwoofer” is set to “Yes”, the set switches to the subwoofer mode.

Speaker type setting when using both surround speakers A and B

If “Small” is set for either surround speakers A or B, the output is the same as when “Small” is set for both A and B.

Setting the crossover frequency and low frequency distribution when playing Dolby Digital and DTS signals

This screen is not displayed when not using a subwoofer.

•Set the crossover frequency and subwoofer mode according to the speaker system being used.

1

Select the “Crossover Frequency” mode.

 

Select the frequency.

19