4
5
6
7
8
Select the mode.
Select “Auto” or “Manual”.
• Auto:
Adjust the level while listening to the test tones produced automatically from the different speakers.
•Manual:
Select the speaker from which you want to produce the test tone to adjust the level.
Example: When the “Auto” mode is selected
Select “Surr. Sp.”, then select the surround speaker(s) from which you want to produce the test tone (A, B or A+B).
•Surr. Sp.: A
Adjusts the balance of the playback level between the channels when using surround speaker A.
• Surr. Sp.: B
Adjusts the balance of the playback level between the channels when using surround speaker B.
•Surr. Sp.: A+B
Adjusts the balance of the playback level between the channels when using surround speakers A and B at the same time.
The “Surr. Sp.” can only be selected when both surround speakers A and B have been selected at the System Setup Menu (when both A and B have been set to “Large” or “Small”).
Select “Test Tone Start”.
Select “Yes”.
a. If the “Auto” mode is selected:
Test tones are automatically emitted from the different speakers. The test tones are emitted from the different speakers in the following order, at
1spkr
SB
Flashing
FL 
C 
FR 
SR 
SBR 
SBL 
SL 
SW
2spkrs
When the surround back speaker setting is set to “1spkr” for “Speaker Configuration”, this is set to “SB”.
Use the CURSOR left and right buttons to adjust all the speakers to the same volume.
The volume can be adjusted between
b.When the “Manual” mode is selected Use the CURSOR up and down to select
the speaker for which you want to output test tones, then use the CURSOR left and right to adjust so that the volume of the test tones from the various speakers is the same.
Example: When the volume is set to
Flashing
Example: When the volume is set to
23