3

Use the • and ª cursor buttons to display “PRE” on the

 

 

remote control unit, then press the ENTER button.

 

• After “SEL” is displayed on the remote control unit’s

 

display, the registered preset memory is displayed on the

 

remote control unit’s display.

When the mode you want to reset is shown on the remote

5 control unit’s display, press the ENTER button to reset the preset memory.

•The LCD’s back light flashes during the resetting operation, and when the operation is completed, “OK” is displayed and the set returns to the normal operating mode.

4

Use the •

and ª

cursor buttons to

 

select the code to be reset.

(2) Resetting “learned” buttons

1

Press the power ON/SOURCE button and the OFF button at

 

 

the same time.

 

• “PRE” appears on the remote control unit’s display.

2

Use the • and ª cursor buttons to display “RST” on the

 

 

remote control unit’s display, then press the ENTER button.

 

• “PRE” is displayed.

3

Use the • and ª cursor buttons to display “LRN” on the

 

 

remote control unit’s display, then press the ENTER button.

 

• “SEL” is displayed.

1

2, 3, 4

DVD1

2, 3, 4

4

Use the • and ª cursor buttons to select the mode of the

 

 

button to be reset, then press the ENTER button.

 

• The LCD’s back light flashes during the resetting operation,

 

and when the operation is completed, “OK” is displayed

 

and the set returns to the normal operating mode.

43