Denon 1083, AVR-3803 1, 4, 1, 4, 2, 3, Learning function

Learning function

If your AV component is not a Denon product or if it cannot be operated using the preset memory, it can be controlled with the accessorious remote control unit by storing its remote control signals in the remote control unit.

For some remote control signals it is not possible to “learn” the signals or the device will not operate properly. In such cases use the remote control unit included with the device to operate it.

1	Press the power ON/SOURCE button and the OFF button
	simultaneously.
	• “PRE” appears on the remote control unit’s display.

2	Use the • and ª cursor buttons to display “LRN” on the
	remote control unit’s display, then press the ENTER button.
	• “SEL” is displayed.

1, 4, 8 DVD 1, 4, 8

7

3	Use the • and ª cursor buttons to select the mode for the
	button to be “learned”, then press the ENTER button.	2, 3	2, 3, 7
	• “KEY” is displayed.

4	Press the button to be “learned” while “KEY” is displayed.
	“START” appears.
	• “AGAIN” is displayed if a button that cannot be “learned”
	is pressed.
	• To cancel, press the power ON/SOURCE button and the
	OFF button simultaneously.

6		“OK” appears on the remote control unit’s display and
		learning is completed.
		• “KEY” is displayed. Other keys can be “learned” by
		repeating steps 4 to 6.
7	The mode can be switched by pressing a mode button while
		the “KEY” indicator is lit.
		When the “ENTER” button is pressed, the “KEY” display
		reappears and the learning standby mode is set.

		8	To cancel the learning mode, press the power ON/SOURCE
5	Point the remote control units directly at each other and press
			button and the OFF button simultaneously again.
	and hold in the button on the other remote control unit which
			Registering is not possible in the receiver mode.
	you want to “learn”.

Other remote control unit

39