Dolby Digital mode (only with digital input) and DTS Surround mode (only with digital input)

1

Select the input source.

Playback with a digital input

q Select an input source set to digital (COAXIAL/OPTICAL) (see page 24).

FUNCTION

1 3

(Main unit)

(Remote control unit)

wSet the input mode to “AUTO” or “DTS”.

 

 

(Main unit)

(Remote control unit)

 

 

 

2

Select the Dolby/DTS Surround mode.

(Remote control unit)

When performing this operation from the main unit’s panel, press the SURROUND MODE button, then turn the SELECT knob and select Dolby Pro logic II or DTS NEO:6.

SELECT

(Main unit)(Main unit)

3

Play a program source with the

 

 

 

 

,

mark.

 

 

 

DIGITAL

 

 

• The Dolby Digital indicator lights

 

 

 

 

when playing Dolby Digital sources.

 

 

 

 

 

Light

 

 

 

 

 

 

 

 

 

 

•

The DTS indicator lights when playing

 

 

 

 

 

 

 

 

 

 

 

DTS sources.

 

 

 

 

 

 

 

Light

 

 

 

 

 

 

 

 

 

 

SIGNAL

 

 

•

The SIGNAL

DETECT

LED lights

 

DETECT

 

Light

when playing

6.1-channel surround

 

 

 

 

 

 

 

 

 

 

sources containing the

identification

 

 

 

 

 

 

 

signal.

When the SIGNAL DETECT LED is lit, we recommend turning the surround back channel using the SURROUND BACK button on the remote control unit and main unit during playback.

Operate the SURROUND BACK button to switch Surround Back CH ON/OFF.

(Main unit)

(Remote control unit)

SURROUND

BACK CH• Lights when the Surround Back CH is

OUTPUT

on.

Light

1 3 2 4,5 2,6

AMP

1

2

4 5, 6

3

1

59