NOTES:

The OPTICAL 4 and 5 jacks on the AVR-3803/1083’s rear panel are equipped with an optical digital output jack for recording digital signals on a CD recorder, MD recorder or other digital recorder. Use this for digital recording between a digital audio source (stereo - 2 channel) and a digital audio recorder.

Do not connect the output of the component connected to the OPTICAL 4 OUT jack on the AVR-3803/1083’s rear panel to any jack other than the OPTICAL 4 IN jack.

Do not connect the output of the component connected to the OPTICAL 5 OUT jack on the AVR-3803/1083’s rear panel to any jack other than the OPTICAL 5 IN jack.

“PHONO” and “TUNER” cannot be selected on the Digital In Assignment.

Setting the Video Setup

This setting assigns the color difference (component) video input jacks of the AVR-3803/1083 for the different input sources.

[1] Setting the Component In Assign.

1

At the System Setup Menu select “Video Setup” and

 

 

press the ENTER button.

2

The “Video Setup” screen appears.

 

 

Select “Component In Assign.” and press the ENTER

 

button.

3

Switch to the Component In Assign. screen.

4

Select the component (Y, PB/CB and PR/CR) video input terminal to be assigned to the input source.

q Input source selection

w Component video terminal selection

Select “NONE” for sources for which the component (Y, PB/CB and PR/CR) video input is not to be used.

When the default, “Yes”, is selected, the settings are reset to the factory defaults.

5

Press the ENTER button to complete the setting.

 

 

At the “Video Setup” screen, select “Exit” and press the ENTER button.

 

The System Setup Menu reappears.

25