3

Set the surround parameter mode.

Display

MODE cinema

(Main unit)

(Remote control unit)

The on-screen display differs according to whether the operation is performed from the main unit or the remote control unit.

This is the screen when operated with the remote control unit.

4

Select the play mode.

 

SELECT

(Main unit)

(Remote control unit)

Display

MODE cinema MODE music MODE emulation

This is the screen when operated with the remote control unit.

5

Select the various parameters. (See “Surround parameters q” for a description of the various parameters.)

(Main unit)

(Remote control unit)

 

MODE CINEMA

 

MODE MUSIC

 

MODE EMULATION

 

 

 

 

 

 

 

 

 

 

 

 

 

CINEMA EQ

 

PANORAMA

 

CINEMA EQ

 

 

 

 

 

 

 

 

 

 

 

 

 

DIMENSION

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CENTER WIDTH

 

 

 

 

 

 

 

 

 

 

 

 

When set with the on-screen display using the remote control unit while in the MUSIC mode, set the “ ” mark to “OPTION 0” using the D and H cursor buttons, then press the F cursor button. Press the ENTER button to return to the previous screen.

6

Set the various surround parameters.

 

SELECT

(Main unit)(Remote control unit)

7

When the surround parameters are set using the buttons on

 

 

the main unit, stop operating buttons after completing the

 

settings. The settings are automatically finalized and the

 

normal display reappears after several seconds.

 

When the settings are made using the buttons on the remote

 

control unit, press the SURR. PARA. button to finish.

 

 

NOTE:

•There are four Dolby Surround Pro Logic modes (NORMAL, PHANTOM, WIDE and 3 STEREO). The AVR-3803/1083 sets the mode automatically according to the types of speakers set during the system setup process (page 18).

Surround parameters qPro Logic II Mode:

The Cinema mode is for use with stereo television shows and all programs encoded in Dolby Surround.

The Music mode is recommended as the standard mode for autosound music systems (no video), and is optional for A/V systems.

The Pro Logic mode offers the same robust surround processing as original Pro Logic in case the source contents is not of optimum quality.

Select one of the modes (“Cinema”, “Music” or “Emulation”).

Panorama Control:

This mode extends the front stereo image to include the surround speakers for an exciting “wraparound” effect with side wall imaging.

Select “OFF” or “ON”.

Dimension Control:

This control gradually adjust the soundfield either towards the front or towards the rear.

The control can be set in 7 steps from 0 to 6.

Center Width Control:

This control adjust the center image so it may be heard only from the center speaker; only from the left/right speakers as a phontom image; or from all three front speakers to varying degrees.

The control can be set in 8 steps from 0 to 7.

57