Setting the Dolby Digital Setup

Sets the down-mixing method when not using a center speaker or surround speakers.

OFF:

The dynamic range is not compressed.

ON:

The dynamic range is compressed automatically according to the combination of speakers being used.

1

At the System Setup Menu select “Dolby Digital

 

 

Setup” and press the ENTER button.

2

Select “ON” if you want to use the Dolby Digital Down-mix, “OFF” if

 

 

you do not want to use it.

3

Enter the setting.

 

 

The System Setup Menu reappears.

Setting the ZONE2 Control

[1]Setting the power amplifier assignment

Make this setting to switch the power amplifier for the surround back channel to ZONE2.

If ZONE2 is selected, the signal that selected at ZONE2 is output at “SURR. BACK/ZONE2 PREOUT” terminals.

1

At the System Setup Menu select “Zone2 Control”

and press the ENTER button.

2

The “Zone2 Control” screen appears.

Select “Power Amp Assignment” and press the

ENTER button.

3

Select “Surround Back” to use as the surround back

channel, “Zone2” to use as Zone 2 out.

When “Surround Back” is selected

When “Zone2” is selected

 

 

27