1 | ON / STANDBY |
(Main unit)
Check that all the connections are correct, | 1 |
then turn on the main unit’s power. |
2 | Display the System Setup Menu. |
|
•The composition of the signals output to the different channels and the frequency response are adjusted automatically according to the combination of speakers actually being used.
1 | At the System Setup Menu select “Speaker Configuration”. |
|
2
3
4
Switch to the speaker configuration screen.
Set whether or not speakers are connected and, if so, their size parameters.
• To select the speaker
• To select the parameter | Center Sp. |
| Front Sp. |
| Subwoofer |
| Surround Sp. A |
| Surround back Sp. |
| Surround Sp. B |
Enter the setting.
a)If no surround speakers are used (if “None” is set for both A and B): The Crossover Frequency screen reappears.
b)If both surround speakers A and B are used (if either “Large” or “Small” is set for both A and B): The surround speaker setting screen appears.
c)When “Front” is set to “Large” and “Subwoofer” is set to “Yes”, the subwoofer mode screen reappears.
d)If “None” is set for surround speakers A:
“None” is automatically set for surround speakers B and surround back speaker.
18