Multi-source recording/playback

With the exception of the case in [2] below, only the signal connected to the analog input jacks are output from the REC OUT and multi-room output jacks.

[1] Playing one source while recording another (REC OUT mode)

Press the REC/MULTI button until “REC

1

OUT SOURCE” appears on the set’s

REC / MULTI

 

 

display.

 

 

 

(Main unit)

2

Select the source you want to record

SELECT

appears on the set’s display.

 

•The indicator for the selected program source lights.

(Main unit)

3

Set the recording mode.

 

 

 

• For operating instructions, refer to

the manual

of the

 

component on which you want to record.

 

 

 

 

 

 

4

To cancel, press the

REC/MULTI

button and

select

“SOURCE”.

REC / MULTI

SELECT

 

(Main unit)

1, 2

 

 

 

1, 4

 

2, 4

 

Display

 

 

2

 

 

 

 

 

 

 

 

 

 

 

REC PHONO CD

TUNER

DVD

/

VDP TV / DBS

 

 

VCR -1

-2 -3

V.AUX

/

TAPE

 

RECOUT SOURCE

NOTES:

•Recording sources other than digital inputs selected in the REC OUT mode are also output to the multi source audio/video output jacks.

•Digital signals are not output from the MULTI ZONE audio output jacks.

[2] Recording Dolby Digital and DTS multichannel sources

•With this set it is possible to record Dolby Digital and DTS multichannel signals converted into 2-channel analog signals.

•The recording signals are output to the MULTI ZONE OUT, TAPE and VCR output terminals.

1Press the REC/MULTI button until “REC OUT SOURCE” appears on the display.

REC / MULTI

 

 

(Main unit)

2

Set the input mode according to the

INPUT MODE

source to be played.

 

 

 

(Main unit)

3

Set the surround mode by pressing the DIRECT or STEREO

button.

 

•The multichannel digital signals are down-mixed and output to the TAPE and VCR output terminals.

 

DIRECT

STEREO

 

 

 

or

or

 

 

 

 

 

(Main unit)

(Remote control unit)

4

Set the recording mode.

 

3

2

3

1

3

52