3 | Select the desired unit, feet or meters. |
| |
| Select (darken) the desired units, “Feet” or “Meters”. |
Example: When “Feet” is selected
4 | Once “Feet” or “Meter” is selected in Step 3, the |
| |
| Delay Time screen appears automatically. |
5
6
Select the speaker to be set.
Set the distance between the center speaker and listening position.
The distance changes in units of 1 foot (0.1 meters) each time the button is pressed. Select the value closest to the measured distance.
Example: When the distance is set to 12 feet for the center speaker
If “Yes” is selected for “Default”, the settings are automatically reset to the default values.
Please note that the difference of distance for every speaker should be 20 ft (6.0 m) or less. If you set an invalid distance, a CAUTION notice, such as screen right will appear. In this case, please relocate the blinking speaker(s) so that its distance is no larger than the value shown in highlighted line.
7 | Enter the setting. |
| |
| The System Setup Menu reappears. |
| The |
22