Playback using the external input (EXT. IN) jacks

1

Set the external input

EXT. IN

 

(EXT. IN) mode.

 

 

 

Press the EXT. IN (or the

 

 

 

EXT. IN button on the remote

 

 

 

control unit) to switch the

 

 

 

external input.

(Main unit)

(Remote control unit)

 

 

Once this is selected, the input signals connected to the FRONT-L , FRONT-R, CENTER, SURR.-L (surround left), SURR.-R (surround right) SB-L (surround back left) and SB-R (surround back right) channels of the EXT. IN jacks are output directly to the front (left and right), center, surround (left and right) and surround back (left and right) speaker systems as well as the pre-out jacks without passing through the surround circuitry.

In addition, the signal input to the SW (subwoofer) jack is output to the PRE OUT SW (subwoofer) jack.

2

Cancelling the external input mode

To cancel the external input (EXT. IN) setting, press the INPUT

MODE or ANALOG button to switch to the desired input

 

mode.

 

 

INPUT MODE

ANALOG

2 1

2 1

(Main unit)

(Remote control unit)

•When the input mode is set to the external input (EXT. IN), the play mode (DIRECT, STEREO, DOLBY/DTS SURROUND, HOME THX CINEMA, WIDE SCREEN, 5CH/7CH STEREO or DSP SIMULATION) cannot be set.

NOTES:

•In play modes other than the external input mode, the signals connected to these jacks cannot be played. In addition, signals cannot be output from channels not connected to the input jacks.

•The external input mode can be set for any input source. To watch video while listening to sound, select the input source to which the video signal is connected, then set this mode.

Playing audio sources (CDs and DVDs)

The AVR-4802R is equipped with three 2-channel playback modes exclusively for music.

Select the mode to suit your tastes.

1

PURE DIRECT mode

1

In this mode, the music is played with an extremely high level

of sound quality.

 

 

When this mode is set, all the video-related circuits are turned

 

 

off so that music signals can be reproduced with high quality.

 

 

When an analog mode is selected, the digital processing

 

 

circuitry is also turned off to achieve analog sound with even

 

 

higher purity.

 

 

PURE

 

 

DIRECT

 

(Main unit)

(Remote control unit)

 

PURE DIRECT display lights.

 

 

SIGNAL

 

 

PURE

 

 

 

 

 

 

 

 

 

DIGITAL

 

 

 

DIRECT

 

 

The display is off in the PURE DIRECT mode.

2 3 4

1 3

2

49