[3] Outputting a program source to an amplifier, etc., in a different room (MULTI mode)

1

Press the REC/MULTI button until “M-

REC / MULTI

ZONE SOURCE” appears on the set’s

 

 

display.

 

 

 

(Main unit)

2

Select the source you want to record

SELECT

appears on the set’s display.

 

•The MULTI indicator lights.

•The indicator for the selected

 

program source light.

 

 

 

• When the AVR-4802R is in the REC

 

 

 

OUT mode, the source cannot be

(Main unit)

 

output using the “MULTI” mode on

 

 

 

the remote control unit.

 

 

 

 

 

 

3

Start playing the source to be output.

 

 

• For operating instructions, refer to

the manuals

of the

 

respective components.

 

 

 

 

 

 

4

To cancel, press the REC/MULTI

button and

select

“SOURCE”.

 

 

REC / MULTI

SELECT

 

(Main unit)

1, 2

 

 

 

 

1, 4

 

2, 4

 

Display

 

 

2

 

 

 

 

 

 

 

 

 

 

 

 

 

PHONO CD

TUNER

DVD

/

VDP TV / DBS

 

 

MULTI

VCR -1

-2 -3

V.AUX

/

TAPE

 

M-ZONE SOURCE

When “Multi” is selected for the system setup’s multi-zone setting, the source selected here is output from the SB/MULTI speaker terminals.

The volume can be adjusted and input source can be selected using the VOLUME + (up) and – (down) buttons on the remote control unit’s “MULTI” mode.

NOTES:

•The signals of the source selected in the Multi mode are also output from the TAPE and VCR recording output terminals.

•Digital signals are not output from the MULTI ZONE audio output jacks.

[4] Remote control unit operations during multi-source playback (selecting the input source)

This operation is possible when MULTI mode is selected. This operation is not possible in the REC OUT mode.

1

Select “MULTI” using the AMP button.

 

(Remote control unit)

2

Press the MULTI ZONE “ON” button.

 

To cancel the MULTI mode.

 

Press the MULTI ZONE “OFF”

 

button.

 

(Remote control unit)

3

Press the input source button

• The MULTI ZONE source switches directly.

4

The output level of the MULTI ZONE

 

 

 

 

 

 

 

 

OUT terminals can be controlled using

 

 

 

 

 

 

 

 

the VOLUME + (up) and – (down)

 

 

 

 

buttons on the remote control unit.

 

 

 

 

The output level of MULTI ZONE OUT

 

 

 

 

can be controlled only if MULTI ZONE

(Remote control unit)

 

vol. level is set “Variable” at Multi Zone

 

 

 

 

 

Control in System Setup Menu. (See

 

 

 

 

page 29)

 

 

 

 

DEFAULT SETTING (ZONE2 VOLUME LEVEL) :

 

- - - dB (MINIMUM)

 

 

 

 

 

 

 

 

2

The main zone output can be

turned on and off with the

1

“MAIN ON/OFF” button.

3

5

4

5

When the MULTI ZONE SOURCE

 

 

function is set to TUNER, the preset

 

channel can be selected using the

 

CHANNEL + (up) and – (down) buttons

 

on the remote control unit.

(Remote control unit)

53