12LISTENING TO THE RADIO
•Check that the remote control unit is set to AMP.
Auto tuning
1 | Set the input function to “TUNER”. |
INPUT SELECTOR |
(Main unit)(Remote control unit)
2 | Watching the display, press the | |
| ||
| BAND button to select the desired | |
| band (AM or FM). | |
3 | (Remote control unit) | |
Press the MODE button to set the | ||
| ||
| auto tuning mode. | |
| “Auto” appears on the display. | |
4 | (Remote control unit) | |
Press the TUNING + (up) or – | ||
| ||
| (down) button. | |
| Automatic searching begins, then | |
| stops when a station is tuned in. |
(Remote control unit)
If tuning does not stop at the desired station, use to the “Manual tuning” operation.
1
| AMP |
3 | 2 |
| |
1 | 4 |
Manual tuning
1 | Set the input function to “TUNER”. | 4 |
INPUT SELECTOR |
(Main unit) | (Remote control unit) | (Remote control unit) |
Press the TUNING + (up) or – (down) button to tune in the desired station. The frequency changes continuously when the button is held in.
2 | Watching the display, press the | |
| ||
| BAND button to select the desired | |
| band (AM or FM). | |
3 | (Remote control unit) | |
Press the MODE button to set the | ||
| ||
| manual tuning mode. | |
| Check that the display’s “AUTO” | |
| indicator turns off. | |
| (Remote control unit) |
NOTES:
•When in the auto tuning mode on the FM band, the “STEREO” indicator lights on the display when a stereo broadcast is tuned in. At open frequencies, the noise is muted and the “TUNED” and “STEREO” indicators turn off.
•When the manual tuning mode is set, FM stereo broadcasts are received in monaural and the “STEREO” indicator turns off.
73