DIRECT mode
2 Use this mode to achieve good quality
DIRECT
(Main unit) | (Remote control unit) |
STEREO mode
3 Use this mode to adjust the tone and achieve the desired sound while watching images.
STEREO
(Main unit) | (Remote control unit) |
|
|
VIDEO ON/OFF button
4 When no video signals of a DVD, etc., are connected to the
VIDEO
ON / OFF
(Main unit)
NOTES:
•The system setup function cannot be used when the PURE DIRECT mode is set or the “VIDEO OFF” setting is selected. To use the system setup function, cancel the PURE DIRECT mode or select the “VIDEO ON” setting.
•The channel level and surround parameters in the PURE DIRECT mode are the same as in the DIRECT mode.
•When the PURE DIRECT button is pressed while in the PURE DIRECT mode, the PURE DIRECT mode is cancelled and the DIRECT mode is set.
•The crossover frequency setting must be set to
[1]Adjusting the sound quality (tone control)
The tone control function will not work in the DIRECT, PURE DIRECT and Home THX Cinema mode.
1 | The tone switches as follows each time the | |
| ||
| TONE CONTROL button is pressed. | |
| BASS | |
|
| |
|
|
|
| TREBLE | |
TONE
CONTROL
(Main unit)
2 | With the name of the volume to be |
| |
| adjusted selected, turn the SELECT |
| knob to adjust the level. |
SELECT
3 2 1
(Main unit)
•To increase the bass or treble: Turn the control clockwise. (The bass or treble sound can be increased to up to +12 dB in steps of 2 dB.)
•To decrease the bass or treble: Turn the control clockwise. (The bass or treble sound can be decreased to up to
3 | If you do not want the bass and treble to be |
adjusted, turn on the tone defeat mode. | |
The signals do not pass through the bass |
and treble adjustment circuits, providing higher quality sound.
TONE
DEFEAT
(Main unit)
50