Denon AVR-5700 manual Setting UP the System, System Setup button, Surround Parameter button

7SETTING UP THE SYSTEM

•Once all connections with other AV components have been completed as described in “CONNECTIONS” (see pages 6 to 13), make the various settings described below on the monitor screen using the AVR-5700’s on-screen display function.

These settings are required to set up the listening room’s AV system centered around the AVR-5700.

•Use the following buttons to set up the system:

AUDIO		DECK	MD
		CD	LOCK	MUTING
AVR/AVC	VIDEO	DVD	TV
		VDP	VCR
		SYSTEM		SURROUND
TUNING		SETUP		PARAMETER
BAND		TITLE		MENU/GUIDE
			CH SELECT
MODE			ENTER
			SELECT
MEMORY		PANEL		ON SCREEN
		DISPLAY		RETURN
USE/LEARN	T.TONE	MULTI		DVD
				SET UP

SYSTEM SETUP button

Press this to display the system setup menu.

SURROUND PARAMETER button

Press this to display the surround parameter menu.

ENTER button

Press this to switch the display on the screen.

Also use this button to complete the setting on the screen.

CURSOR buttons

and : Use these to move the cursors (0and 1) to the left and right on the screen.

and : Use these to move the cursors (•and ª) up and down on the screen.

• System setup items and default values (set upon shipment from the factory)

System setup

Default settings

Input the combination of speakers in your system and their

Front Sp.

Center Sp.

Surround Sp.

Sub Woofer

Speaker

corresponding sizes (SMALL for regular speakers, LARGE for full-

Configuration

size, full-range) to automatically set the composition of the signals

Small

Small

Small

Yes

output from the speakers and the frequency response.

Q

Use this function when using multiple surround speaker

Surround

DOLBY/

THX

WIDE

5CH

DSP

—

—

DTS

SIMULA-

EXT. IN

(Surround

combinations for more ideal surround sound. Once the

mode

SURROUND

SCREEN

STEREO

SURROUND

TION

combinations of surround speakers to be used for the

Speaker

different surround modes are preset, the surround

Setting)

speakers are selected automatically according to the

Surround

A

A

A

A

A

A

—

—

surround mode.

speaker

W

Bass Output

This selects the subwoofer speaker for playing deep bass signals.

Bass Out = Subwoofer Only THX

Delay Time

This parameter is for optimizing the timing with which the audio

Front L & R

Center

Surround L & R

Sub Woofer

E

signals are produced from the speakers and subwoofer according to

3.6 m (12 ft)

3.6 m (12 ft)

3.0 m (10 ft)

3.6 m (12 ft)

the listening position.

LevelChannel

This adjusts the volume of the signals output from the speakers and

Front L

Front R

Center

Surround

Surround

Subwoofer

L

R

R

subwoofer for the different channels in order to obtain optimum

effects.

0 dB

0 dB

0 dB

0 dB

0 dB

0 dB

Subwoofer

This parameter is for detecting the maximum level of the low bass

signals output from the subwoofer channel in order to protect the

Peak Limitter = OFF

T

Peak Limit

subwoofer from damage and prevent unpleasant distorted sounds

Lev

from being produced.

Input

CD

DVD

VDP

TV/DBS

VCR-1

VCR-2

V. AUX

TAPE-1

This assigns the digital input jacks for the different input

source

Y

Digital Inputs

sources.

Digital

COAXIAL

COAXIAL

COAXIAL

OPTICAL

OPTICAL

OPTICAL

OPTICAL

OPTICAL

Inputs

1

2

3

1

2

3

4

5

On Screen

This sets whether or not to display the on-screen display that

U

appears on the monitor screen when the controls on the remote

On Screen Display = ON

Display

control unit or main unit are operated (from MONITOR 1 outputs

only).

A1 ~ A8

87.5/89.1/98.1/107.9/90.1/90.1/90.1/90.1 MHz

B1 ~B8

520/600/1000/1400/1500/1710 kHz/90.1/90.1 MHz

I

Auto Tuner

FM stations are received automatically and stored in the memory.

C1 ~C8

90.1 MHz

Presets

D1 ~D8

90.1 MHz

E1 ~E8

90.1 MHz

NOTES:

• The on-screen display signals are not output from the MONITOR OUT-2 output jack or the color difference (component) video signal (MONITOR OUT) jacks.

• The on-screen display signals are output with priority to the S-VIDEO MONITOR OUT jack during playback of a video component. For example, if the TV monitor is connected to both the AVR-5700’s S-Video and video monitor output jacks and signals are input to the AVR-5700 from a video source (VDP, etc.) connected to both the S-Video and video input jacks, the on-screen display signals are output with priority to the S-Video monitor output. If you wish to output the signals to the video monitor output jack, do not connect a cord to the S-VIDEO MONITOR OUT jack. (For details, see page 27.)

• The AVR-5700’s on-screen display function is designed for use with high resolution monitor TVs, so it may be difficult to read small characters on TVs with small screens or low resolutions.

• The setup menu is not displayed when headphones are being used.

16