17 SPECIFICATIONS

2 Audio section

 

 

Power amplifier

 

 

Rated output:

Stereo (2ch driven)

(All properties shown are only

140

W + 140 W (8 Ω /ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)

for the power amplifier stage.)

170

W + 170 W (8 Ω /ohms, 1 kHz with 0.7% T.H.D.)

 

Surround

 

140

W x 5 ch (8 Ω /ohms, 1 kHz with 0.7% T.H.D.)

Dynamic power:

Output terminals:

Analog

Input sensitivity / input impedance: Frequency response:

S/N:

Distortion:

Rated output/maximum output: Maximum headphones output:

Digital

D/A output:

Digital input:

Phono equalizer (PHONO input — REC OUT) Input sensitivity:

RIAA deviation: Signal-to-noise ratio:

Rated output / Maximum output: Distortion factor:

2Video section

Standard video jacks

Input / output level and impedance: Frequency response:

S-video jacks

Input / output level and impedance: Frequency response:

Color component video terminal Input / output level and impedance:

Frequency response:

2Tuner section

Receiving Range:

Usable Sensitivity:

50 dB Quieting Sensitivity:

Signal to Noise Ratio (IHF-A):

Total Harmonic Distortion (at 1 kHz):

2General

Power supply:

Power consumption:

Maximum external dimensions:

Weight:

2Remote control unit (RC-853) Batteries:

External dimensions: Weight:

190 W x 2 ch

(8 Ω /ohms)

310 W x 2 ch

(4 Ω /ohms)

390 W x 2 ch

(2 Ω /ohms)

Front/Center:

16 ~ 16 Ω /ohms

Surround:

A or B 16 ~ 16 Ω /ohms

 

A + B 12 ~ 16 Ω /ohms

200 mV / 47 kΩ /kohms

10 Hz ~ 100 kHz: +0, –3 dB (DIRECT mode) 105 dB (DIRECT mode)

0.005% (20 Hz ~ 20 kHz) (DIRECT mode)

1.2 V / 8 V

284 mW (8 Ω /ohms)

Rated output — 2 V (at 0 dB playback)

Total harmonic distortion — 0.005% (1 kHz, at 0 dB)

S/N ratio — 105 dB

Dynamic range — 96 dB

Format — Digital audio interface

2.5 mV

±1 dB (20 Hz to 20 kHz)

74 dB (A weighting, with 5 mV input)

150 mV / 8 V

0.03% (1 kHz, 3 V)

1 Vp-p, 75 Ω /ohms

5 Hz ~ 10 MHz — +0, –3 dB

Y (brightness) signal —

1 Vp-p, 75 Ω /ohms

C (color) signal — 0.286 Vp-p, 75 Ω /ohms

5 Hz ~ 10 MHz — +0, –3 dB

Y (brightness) signal —

1 Vp-p, 75 Ω /ohms

Cb (blue) signal — 0.7 Vp-p, 75 Ω /ohms

Cr (red) signal — 0.7Vp-p, 75 Ω /ohms

5 Hz ~ 20 MHz — +0, –3 dB

[FM] (note: µV at 75 Ω /ohms, 0 dBf = 1 x 10–15W) [AM]

87.5 MHz ~ 107.9 MHz

520 kHz ~ 1710 kHz

1.0 µV (11.2 dBf)

18 µV

MONO

1.6 µV (15.3 dBf)

STEREO

23 µV (38.5 dBf)

MONO

80 dB

50 dB

STEREO

75 dB

 

MONO

0.15%

 

STEREO

0.3%

 

AC 120 V, 60 Hz 11 A

434 (W) x 181 (H) x 494 (D) mm (17-3/32” x 7-1/8” x 19-29/64”) 21.5 kg (47 lbs 6 oz)

R6P/AA Type (two batteries)

70 (W) x 215 (H) x 24 (D) mm (2-3/4” x 8-15/32” x 15/16”) 200 g (Approx. 7 oz) (including batteries)

* For purposes of improvement, specifications and design are subject to change without notice.

62

Page 62
Image 62
Denon AVR-5700 manual Specifications, Audio section Power amplifier Rated output