2 | Switch to the Delay Time screen. |
ENTER |
3 | Select the desired unit, meters or feet. |
| |
| Select (darken) the desired units, “Meters” or “Feet”. |
Example: When “Feet” is selected
4 | Once “Meters” or “Feet” is selected in step 3, the Delay Time screen appears automatically. |
5
6
Select the speaker to be set.
Set the distance between the center speaker and listening position.
The distance changes in units of 0.1 meters (1 foot) each time the button is pressed. Select the value closest to the measured distance.
Example: When the distance is set to 12 feet for the center speaker (L1)
2If “Yes” is selected for “Default”, the settings are
automatically reset to the default values.
Please note that the difference of distance for every speaker should be 15 ft (4.5 m) or less. If you set an invalid distance, a CAUTION notice, such as screen right will appear. In this case, please relocate the blinking speaker(s) so that its distance is no larger than the value shown in highlighted line.
21
