INSTALLATION
Continued
5.For CCL3924PTA/NTA and CCL3930PTB/NTB Only: Locate pin and hole on the bottom of crossover log (#5). Slide the pin into the hole located in crossover log (#4). Slide the hole onto the pin on front log (#1). See Figure 28.
For CCL3018PA/NA and CCL3018PTA/NTA Only: Locate holes on the bottom of crossover log (#5). Slide the holes over the left pins on middle log (#2) and front log (#1). See Figure 29.
6.Locate holes on the bottom of crossover log (#6). Slide these holes onto the right pins lo- cated in middle log (#2) and front log (#1). See Figure 30 for CCL3924PTA/NTA or CCL3930PTB/NTB. See Figure 29 for CCL3018PA/NA or CCL3018PTA/NTA.
7.For CCL3930PTB/NTB only: Locate holes on the bottom of crossover log (#7). Slide onto the pins located in crossover log (#6) and middle log (#2). See Figure 31.
8.Add lava rock around base of heater if desired. Do not place any lava rock on logs or burner.
Crossover
Log (#5)
Crossover
Log (#4)
Crossover
Crossover Crossover Log (#6)
Log (#4)
Log (#5)
Middle
Log (#2)
Front 
Log (#1)
Figure 29 - Installing Crossover Log #5
and Log #6 (CCL3018PA/NA and
CCL3018PTA/NTA Only)
| Crossover |
| Log (#6) |
| 6 |
| Pins |
| Middle |
Front | Log (#2) |
Log (#1) |
|
Figure 30 - Installing Crossover Log #6 | ||
(CCL3930PTB/NTB Shown) | ||
Front Log (#1) |
| Crossover |
Holes |
| |
| Log (#7) | |
Figure 28 - Installing Crossover Log #5 |
| |
|
| |
(CCL3930PTB/NTB Shown) |
|
|
| 7 | Middle |
|
| |
Log (#2)
Crossover |
Log (#6) |
Pins
Figure 31 - Installing Crossover Log #7
(Model CCL3930PTB/NTB Only)
18 | www.desatech.com |
