Flybook V5_User's Guide_V1.0.book Page 68 Thursday, February 8, 2007 3:44 PM
A Troubleshooting
If failure is detected in an area other than the mainboard, an error message is displayed on the screen and testing is stopped.
If your system does not successfully start, but displays a blank screen, emits a series of beeps, or displays an error code, consult your dealer.
General Hardware Problems
A few common hardware problems and suggested solu- tions are presented below:
The display screen is dark
1.Adjust the screen brightness.
2.Make sure that the computer is not in suspend mode.
An incorrect date and time are displayed.
Correct the date and time using the DOS DATE and TIME commands or the options in the Setup Utility. (You can also set the date and time in Windows by double clicking the clock on the task bar or in the control panel.) If the date and time become incorrect after a short time, your CMOS bat- tery may be depleted. Contact your dealer to change the battery.
The computer does not start or boot-up
1.If the power indicator is not on, the computer is without power. Make sure you have properly attached the AC adapter and power cord, or have installed a charged battery.
2.If the computer is running on battery power, ensure that the battery charge is not low. If the battery appears to be charged, it may be faulty.
68
