1190SROM 9/22/06 1:51 PM Page 11
Assembly Instructions
sure to include a flat and split lock washer on each bolt.
5-9. Install seat back pad on the seat frame using the four M6 x 15mm screws, making sure to include a flat and split lock washer on each bolt.
Step 6: Seat Back Cover
Install the seat back cover over the back of the seat using the four M6 x 15mm screws.
Step 7: Pedal Assembly
Use a 15mm or adjustable open-end wrench to firmly tighten the pedals to the cranks. The left and right pedals are different and are denoted as right or left (R or L) on the top & bottom of each pedal. Note that the left pedal will thread counter-clockwise.
Note: Pedals should be re-tightened after the first 10 hours of use as they may become loose until they have fully seated to the crank.
