DigiTech GSP1101 Rear Panel, Power Jack, 2.USB, Footswitch, Expression, Configuration Port

Rear Panel

Rear Panel

1 2 3 4 5 6 7 8 9 10 11 12 13

1.Power Jack.

Attach the included power cord here.

2.USB

The USB jack connects the GSP1101 to a computer and serves two purposes. First, it lets the GSP1101 communicate with the X-Edit Editor/Librarian software. Second, it is used to stream four channels of audio (2 up/2 back) to and from the computer when using the GSP1101 with recording software. USB drivers must be installed prior to using the USB port.These can be found on the included CD.

3.Footswitch

This 1/4” jack connects the optional FS300 3-button footswitch. Functions include preset up, preset down, and bypass.

4.Expression

Connect any passive volume pedal here to control nearly any of the GSP1101 effects in real time. See page 40 for more information about assigning parameters to the Expression Pedal.

5.Configuration Port

This RJ45 jack is reserved for future use. Do not connect to an Eth ernet port.

The connected device will be damaged.

6.MIDI In

Connects to MIDI devices, letting them control the GSP1101. The GSP1101 responds to MIDI program changes and CC messages. See page 48 for more information about MIDI.

7.MIDI Thru

Passes on MIDI signals from the MIDI In jack to MIDI devices downstream. Can also be used for allowing the GSP1101 to transmit MIDI program changes to another device (See page 48 for more information about MIDI.)

GSP1101 Owner’s Manual